Recent content by tdias

Seems like it's not completely OK. On the first boot my card was detected and worked fine, after a reboot it hangs loading the card with the following error: mps0: mps_wait_db_ack: failed due to timeout count(10000), int_status(c0000000)! mps0: Doobell handshake failed ...

It finally works! After the BIOS update, a change from q35 to pc-q35-3.1 makes FreeNAS recognize the disks!

After a firmware and BIOS update I finally have the BIOS loading in the VM and no more hangs, that said, FreeNAS is still not recognizing the card. This time with no errors.

I've tried installing ESXI and I get the boot stuck on the same error as well, without the "IOC in failed state" part. I'll try updating the card firmware and see if it changes anything.

Yes. I don't get the first error, but I get the same FreeNAS error Thank you for the first link! It indeed has a link to the broadcom driver page. About the second part, I tried disabling the card booting in the settings and nothing changed.

Hello everyone, I've been fighting this issue for the last day with no success. I've tried all of the methods I found in threads on this forum with no advances. I'm trying to pass an LSI SAS9201-8i card to a FreeNAS VM. I've set the VM to q35 mode, the card to pcie, and tried all combinations...