Recent content by Steve2

is there a way, to et up two or more vmbr's on different Ip ranges, with each their own gateway ? when I want to add it, the system doesn't let me. The idea is, to try to have one particular VM, connect to this one, while ssh should still run over first vmbr or is there another way, to link...

have fun ;) Raid 5 is not the best, but...well, you need 4 discs going raid 6 , and I would say, better 6-8 at least. One thing.... get backup...tapedrives....

yea... looked toward the Dell H710 doc, mentioning Jbod capability. I'm now looking how much Raid capable HBA cards I'm going to get. Need to connect a bunch of discshelves... some are nas, some are sas based... still want to addres them as Raided. me looking getting these too : LSI MegaRAID SAS...

I mean Proxmox, and it will make a local 'disc' there too, to preload some 'images', which you then later can install. We are expanding now, one of our machines is running with a HP P420, which we had to make settings in the CLI, as the Raid card isn't sitting in a server. I would take a look on...

setup two raid configs : -5 x 278GB, which will result as about 1GB ( 4 x 278GB) underf Raid 5 -3 x4TB, Raid 5 , ending up with about 8TB space, but 3 discs... hmm Use SSD as OS bootdisc. If you prepare raids, OS will pick them up When you want to add more discs, you need to build a new raid...

Ceph indeed does it thing, yet, as I understand, ceph is using zfs, and zfs eats cpu power. Looking into zfs, I ended up into a discussion between hardware raid guys, and a a ZFS guy. The raid guys threw on the table, that you need one cpu core, per disc, and the ZFS guy did not refute that...

I'm not really into the ZFS, nor btrf thing, and prefere hardware raid. Agreed, hardware Raid makes it harder, but it will offload your processor(s) anyway, and for what I understand, ZFS would need to require you also, to switch off write cache. In our case, we are working with an amount of...

Hi, We ran more or less into the same problem, now running a Raid 5 on a HP sas controller, on a non HP machine...means console coding, no boot setup... Once the Raid configs we're available, Proxmox picked it right up. due to the initial problems, proxmox is now sitting on a sata drive, on the...

Next setup, we'll give it a try. The weird thing is, after installation, it happely uses the HD2450

Hi, building a few Proxmox machines, previous used igpu, next gen used a cheap GT 520, to now notice the installer just stopping when it should start posting.... Installing with the Gt makes install going, when installed, it will work with the ATI... Why these older cards ? motherboard doesn't...