Recent content by scontin

uname -aLinux pve-greenproject 6.17.2-2-pve #1 SMP PREEMPT_DYNAMIC PMX 6.17.2-2 (2025-11-26T12:33Z) x86_64 GNU/Linuxmodinfo megaraid_sas | sed -n '1,20p'filename: /lib/modules/6.17.2-2-pve/kernel/drivers/scsi/megaraid/megaraid_sas.kodescription: Broadcom MegaRAID SAS Driverauthor...

Server is in production.... I can't do other test. The problem has already done enough damage... proxmox-boot-tool refresh is enough

sd 0:2:1:0: [sda] tag#4057 page boundary ptr_sgl: 0x00000000ba1fad69[ 28.571202] BUG: unable to handle page fault for address: ff72bd070403c000[ 28.571210] #PF: supervisor write access in kernel mode[ 28.571216] #PF: error_code(0x0002) - not-present page[ 28.571222] PGD 100000067 P4D...

I add mine. Brand new HP Proliant Gen 11, INTEL(R) XEON(R) SILVER 4514Y, megaraid_sas LSI MegaRAID 12GSAS/PCIe Secure SAS39xx. With 6.17 kernel, immediately a kernel panic only doing a simple proxmox-boot-tool refresh. Serious matter.

I contirm disabling x2APIC works! Problem found. Thanks to all.

No News?

I confirm. DELL T140

DELL T140 lspci -nnk | grep -i broadcom 01:00.0 RAID bus controller [0104]: Broadcom / LSI MegaRAID SAS-3 3008 [Fury] [1000:005f] (rev 02) 05:00.0 Ethernet controller [0200]: Broadcom Inc. and subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f] 05:00.1 Ethernet controller [0200]...

Affected T140 ethtool -i eno1 driver: tg3 version: 6.2.16-19-pve firmware-version: 5719-v1.46 NCSI v1.5.33.0 expansion-rom-version: bus-info: 0000:02:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes supports-priv-flags: no

I confirm DELL with BCM5720 + kernel 6.5 won't boot on PowerEdge T140. This is a very serious issue, because a lot of DELL servers use this NIC. Please resolve!!

Today I noticed on a host that installing new kernel failed. pve-manager/7.0-11/63d82f4e (running kernel: 5.11.22-2-pve), ZFS-RAID1, BIOS/Legacy mode on a DELL server. Mounting the EFI partition, afterward I discovered in /EFI/proxmox/ there was some files. In a 7.0-11 environment, can I...

It works.

Hello, I'm a bit confused. I have an old Proxmox 5.3 upgraded to 6.4, with BIOS grub and ZFS on root pveversion pve-manager/6.4-13/9f411e79 (running kernel: 5.4.106-1-pve) findmnt / TARGET SOURCE FSTYPE OPTIONS / rpool/ROOT/pve-1 zfs rw,relatime,xattr,noacl lsblk -o...

Hello. Is it safe to upgrade remotely a Proxmox instance 6.4 on ZFS (/ too)?? pve6to7 --full all passed.

So, no WireGuard support?