Recent content by sapphiron

Older servers power draw is just too high unfortunately Ideally we are looking for an Nuc type device that supports 10gig ethernet

We are planning to max them out at 64GB of RAM and the 1240p CPU has 4 performance cores and 8 efficiency cores, so that should not be a bottleneck

Hi All I am working on a proof of concept for a micro hosting requirement. The client requires hosting of many small VM's, about 30-50 of 2GB of RAM each and 30GB of storage each. CPU and disk Load generated by these VM's are very low. They are looking to retire their two old Dell R540...

Hi All I am recovering data from a lab server that got borked due to power loss and now kernel panics on boot I did a new 7.2 install on a separate SSD. Old version was 7.1 I connected the old boot SSD to the system and ran an to get the disk imported I then noticed that the disk is...

I have also been experiencing the same since my upgrade to Proxmox 5.1. I restarted a container, which resulted in Kworker using 100% CPU of IOWAIT. however, non of the disk devices had high utilization percentages, they were normal. VM and containers already running, also experienced no...

Hi All I am consulting with a client, who is using Proxmox with a Intel Modular server that, which is getting pretty old now. We are busy looking into replacement hardware for them. Ideally they would like to retain the ability to live migrate they VPS client from one Node to another, for...

See this about Ceph on ZFS https://www.spinics.net/lists/ceph-users/msg33646.html When selecting distributed storage, most seem to either select Gluster on top of ZFS, or Ceph on XFS.

WIth NVME disks, I sometimes needed to create GPT partition tables using a Ubuntu live CD first, before Proxmox can create partitions.

1. The Satadom MLC device should be ok, so long as you dont use it for VM storage. 2. seems like overkill in terms of capacity, remember L2Arc has overheads. Maybe partition the drives as follows: - 2x 10GB mirror - Log - 2x 100GB stripe - L2arc - 2x mirror balance - Pure SSD pool 3. 2...

I am also experiencing the same in Proxmox 4.4. When this Container used to be a KVM VM, the backup took 2 hours or so, now it takes 16 hours. backing up to NFS.

Problem solved by rebooting host.

Hi all Using Proxmox 4.4-12 - community subscription after created a new container using the debian8.0-standard_8.6-1.tar.gz template, I am unable to login via SSH, or via Console. I have also tried and older debian 8.0 that I have used in the past, same problem. I have also tried usernames...

manu, Thank you for the input. yes, i was referring to Multi-queue. There are 3 unused NICs in the server. I will look into the passthrough option, but it does not leave a lot of flexibility, so I will consider it a last resort. Would using OVS be more or less efficient?

Hi All I have 2 Windows server 2012 R2 on the same host connected on an internal bridge network. They access internet connectivity via an Untangle Firewall with an interface bridged on an external adapter and another on the internal bridge. The Internal Bridge has no physical adaptor assigned...

ok, I have tried downgrading to the stable Virtio drivers. Still seeing weirdness on fresh installations. Linux guests are completely fine