why virtio-9p-pci (virtfs) is not implemented ?
is there another way to share a partition or folder between the host and guest ?
bare metal Proxmox 2.1
pveversion -v
pve-manager: 2.1-14 (pve-manager/2.1/f32f3f46)
running kernel: 2.6.32-14-pve
proxmox-ve-2.6.32: 2.1-73...
srv-proxmox (cluster and node)dell poweredge T310
3 network interfaces
network interface active -> eth2
vlan Untagged
srv-proxmox2 (node)basic pc
2 network interfaces
network interface active -> eth1
vlan Untagged
Servers are on the same network
Multicast tested and OK
Test 091°...
You made some updates since last Friday, no ?
I have no error for apache configuration (symlink OK : /etc/pve/local -> /etc/pve/clusters/srv-proxmox)
The warning and error still exist
But there is apparently no effect
It's just "unfortunate" (not sure of the term)
Ok let's go
still tests ...
OK !
all tests are done with the same material without vlan
Test I1° Installation cd Proxmox V2 beta
2° configuration network
3° update
4° create cluster
=> same error.
Test II1° Installation cd Proxmox V2 beta
2° configuration network
3° no update
4° create cluster
=> OK ! Yes ...
Can you explain why this is not possible ?
all pc are Untagged and the server is tagged and it works !!
This is the switch that forwards packets
cluster : srv-proxmox 10.1.25.212 and node : srv-proxmox2 10.1.25.118 are on the same network, on the same vlan
sorry for google traduction
Ok but ...
cluster :
srv-proxmox 10.1.25.212
network vlan (tagged)
node :
srv-proxmox2 10.1.25.118
network Untagged
I joined a node to the cluster as shown in the wiki (http://pve.proxmox.com/wiki/Proxmox_VE_2.0_Cluster) and I get an error :
and reboot srv-proxmox2
Display boot :
there...
when starting the pc everything is ok but when you look at the daemon.log file, the ntpd has a problem initializing and quorum initialize failed
The problem is probably due to high latency of the network initialization ??
part of /var/log/messages
ACPI error -> important or not ???
New...
Hello,
First I configured the network
Secondly I have updated the system (apt-get update, apt-get upgrade, apt-get dist-upgrade)
Third, I created the cluster (pvecm create asgard)
Is it normal to have :
[dcdb] notice: wrote new cluster config '/etc/cluster/cluster.conf'
[dcdb] crit...
hello,
Would it be possible to use ldap groups ?
This would greatly facilitate users management.
it's just to see if this is provided in the future.
Well done for your work.
sorry for the translation google
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.