Recent content by RNab

Hey. Sorry to post here, do let me know if I should create a new topic. I have a 3 nodes cluster, and one of them kept having this SSH Key issue. I followed the above steps carefully, and since then, I'm getting a lot of UI errors (ie, the WebUI of one of the node can't interact with the other...

The unsafe shutdown are a result of the system crashing not the cause though no ? Just to add, after some research it seems the Error Information Log entries is fairly benign. The only issue I spot when using nvme error-log CLI is : 0x2002(Invalid Field in Command: A reserved coded value or...

Hi all, I've been struggling with some issues on my Proxmox server on a NUC 11. It has a NVME drive 970 Pro. I have already unmounted/remounted all components manually in case it was an issue with the connection. But basically, every now and then the machine would stop responding and looking at...

Just in case you missed my message, would you be able to let me know what you did to make it work with Nginx in between ? I've tried many combination (I'm using Traefik) and can't figure it out. Not sure what I could be missing

thanks for all your inputs. Can you let me know how you did that with Nginx ? I actually use traefik as an interface between teleport and my proxmox so this could work for me. if you know if à GitHub issue let me know as well I could describe my problem there to help. I couldn’t find one.

Any solution was found for this here ?

Hey. Did you find a solution ? I'm getting the same issue here

I have the same issue as you, adn exactly the same drive. Basically, same problem, it works, but every few days, it crashes with the above error. Did you manage to fix it ?

Hi all, Hope i can get some help here. Recently, when backing up one of my VM, it would always fail at 78% with error -125. I checked multiple times, it doesnt seem to be related to resources (OOM or else). I restored an old backup, and it was "all ok" for probably around a month or 2, until...

oh so you mean a failure is a job abort actually ? Ok that makes it a lot clearer indeed. Ok thanks a lot for your help. I will do some tests in my side.

Hi, I have been looking around but honestly struggled to find documentation on that. I’m trying to setup a hook script to run at the end of my PBS and regular Backup Job. What I’m trying to do is one each VM backup is finished, depending on the status, I would do a given action for that VM...

I tried your first config (slightly adjusted to my config), and I'm getting this error : warning: bond: attribute bond-min-links is set to '0' error: netlink: bond: cannot set dev bond address 10:69:7a:a5:04:cd: operation failed with 'Device or resource busy' This is what the config looks...

Yes indeed, the switch is configured for the two ports to be on LAG (id 2)

Ok thanks for your help. From what you see on the data sheet, anything I can do to improve my network speed ? Or is the only solution a new switch ?

I’m not too sure actually. I realised my switch manual mentions only LAG and static link aggregation. I don’t know enough about LACP and LAG. https://cdn.cnetcontent.com/77/7c/777c1e16-24f7-4890-8ee1-69f16bdec540.pdf