readyspace's latest activity
-
readyspace replied to the thread Host connection issues with the VMs..Hi, please share more information as following if possible: Host network config: post the relevant parts of /etc/network/interfaces (or whatever file you use) showing eno1, the bridge (vmbr), and how they’re connected. VM NIC info: inside the... -
readyspace replied to the thread How to read SFP+ module details from Mellanox ConnectX-2 MNPA19-XTR.Hi @logan893 , yes you are right. the older card doesnt have the necessary drivers for what you are looking for.
-
readyspace replied to the thread config issue with multiple VLAN and cisco device.Thanks for sharing your config — you’re almost there. A few quick points: Keep only one bridge (vmbr0) — you already made it VLAN-aware, so no need to create vmbr0.110 unless the Proxmox host itself needs an IP inside that VLAN. For your VMs...
-
readyspace replied to the thread How to read SFP+ module details from Mellanox ConnectX-2 MNPA19-XTR.Are you running the latest PVE9? If so, you might need to upgrade to ConnectX-3 or newer to read the info
-
readyspace replied to the thread config issue with multiple VLAN and cisco device.Hi, have you started your configuration in Proxmox VE nodes? If so, can you share the config in there?
-
readyspace replied to the thread [EDIT: Mellanox NIC not working] VMs not connecting after change to vmbr0.Are the eno1, 2, 3 and 4 all on the same physical NIC or motherboard?
-
readyspace replied to the thread Host connection issues with the VMs..Hi, are you running on default NIC settings and no firewall on VM?
-
readyspace replied to the thread Proper or best practice way to set-up VLANs on single NIC?.Just a quick question - Is the bridge in Proxmox VE set to VLAN aware?
-
readyspace replied to the thread Proton VPN on Proxmox 9 host.Running in VM will work, but on the Host itself will see conflicts and complications.
-
readyspace replied to the thread Live Migration - Fails on a large disk.The log shows the disk mirror starts over NBD via SSH, progresses for minutes, then the channel fails (“open failed … Broken pipe”). That’s classic of a transport drop under sustained load. Some of the things you can check - Are MTUs identical...