Recent content by proxtib

The NICs worked very well until the beginning of the week. I unplugged all the disks and plugged in a new one. When I boot from the USB key with Debian 13.3.0 ISO, I can see an enx@mac1 network interface but it does not seem to work. Debian was therefore installed without networks. First...

With cli: https://pve.proxmox.com/pve-docs/pveam.1.html # Update Container Template Database. pveam update # Get list of all templates on storage pveam list local #or local-lvm or lxctemplate-volume # List available templates. pveam available

So with a iso (archlinux iso) I see # ls /sys/class/net enp42s0f3u5u3c2 lo # cat /sys/class/net/enp42s0f3u5u3c2 a MAC @; the same as enxmac@1 proxmox card With proxmox # lshw -class network *-network DISABLED description : Ethernet interface physical id: 4 bus info usb@3:5.3...

Damn, you confirm my fears... Both cards are soldered to the motherboard PCB. So I can't take them off like that. No it wasn't there, but it may be the USB network card that I connected. But when executing the 'ls /sys/class/net/' command, I restarted proxmox and my usb card was not...

Hello, I use the Asrockrack X570D4I-2T (driver are somthing like X550 or ixgbe ? ) I had to take the card out of the case, for a little cleaning (dust) check for disk problems. Once this is done, Proxmox (pve) starts but no trace of the 2 integrated network cards. No problem with the IPMI card...

Hello. My proxmox server has a 10Gb network card and he is behind a 2.5Gb switch. But with iperf3 test, I observe that I only have a speed of 1Mb/s. When I execute ethtool on one of my interface , I have the following result: ethtool enp35s0f1 Settings for enp35s0f1: Supported ports: [ TP ]...

apt update && apt upgrade -y && apt install gpg -y wget -q https://repos.influxdata.com/influxdb.key echo '23a1c8836f0afc5ed24e0486339d7cc8f6790b83886c4c96995b88a061c5bb5d influxdb.key' | sha256sum -c && cat influxdb.key | gpg --dearmor | tee /etc/apt/trusted.gpg.d/influxdb.gpg > /dev/null echo...

Yes, or the simplest, the "help" button, when configuring influxDB via the graphical interface. :) Anyway, I have no data on my InfluxDB bucket. And I have the following issue when I execute "systemctl status influxdb" Do you know where the log influxdb are located ? I have nothing on...

Ok so InfluxDB2 with https. For information: # cat /etc/influxdb/config.toml bolt-path = "/var/lib/influxdb/influxd.bolt" engine-path = "/var/lib/influxdb/engine" tls-cert = "/etc/influxdb/mycert.crt" tls-key = "/etc/influxdb/mykey.key" # chmod 644 /etc/influxdb/mycert.crt # chmod 600...

Hello, I would like to use an influx db db as a proxmox metric server and after connecting them to Grafana. - What is the recommended version of influxdb ? Influxdb or Influxdb2 ? - I am not sure, with Influxdb2 only http https works ? No udp ? - When I try to connect promox to a lxc influxdb2...

Thank you for your answer. ok. But what would you recommend for personal use; with these discs ? Raid lvm with ext4 ?

Hello, I have decide to transfere all my nas HDD on my Promox server and after little issue (see here: Failed to import pool ‘rpool’; ssd ko ? No go to X570D4I-2T BIOS!), it’s done proxmox see they new hdd (and one new ssd ) First one question: Proxmox see my new HDD … and also the raid 5...

OK I have it ! So ... I have tested my SSD with a dock, they are ok, So it's something else. With blkid ... I only have sda ... the SSD M2 ... And I remembered something last night ... My proxmox mother card is ASRock X570D4I-2T, this mother card have 2 OCuLink. AND this port are not in SATA...

Hello, My Proxmox server worked very well. But I changed it from computer case to add more hard drive But now I have the next message when I start it. Begin : Importing ZFS root pool ‘rpool’ … Begin : Importing pool ‘rpool’ using defaults … Failure : 1 Failure : 1 Command : /sbin/zpool...

Even if I select NFSv4, is NFSv3 used? o_O Anyway, which ports should I open on my FW? Thanks for the help