Recent content by peterka

Thanx ==== root@h1:~# ip route default via 192.168.10.1 dev vmbr10 proto kernel onlink 192.168.10.0/24 dev vmbr10 proto kernel scope link src 192.168.10.2 ==== root@h1:~# ip address 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000...

no route to gateway, but I do not know why. from h1=PVE (192.168.10.2) I can not ping r2=OPNsense=Gateway of internal network (192.168.10.1) This means I can not update PVE. I use OPNsense as Router from vmbr10 (LAN) to vmbr0 (WLAN, connected to a DSL-Router). But I can ping from any other...

Thank You oguz for Your efforts. I believe it is an UCS5-Problem around the domain handling (Samba4 / Active Directory domain controller). I am digging into it and will report on it. I can mount shares from OMV5 and OMV6 (running on PVE7 as well) without any problem on the same client.

Great job done, tuxis! I am looking for a way for clients to log to spice without logging in first the admin-gui-webpage. Best would be the possibility to send a link to a single VM/LXC-C and/or web-page on another port to select one VM/LXC-C and then login.

I suggest Proxmox to set up a second webpage on PVE7-hosts, say on <host>:80, to show a selector for VMs and LXC Containers to be opened by a client.

Attached are the tcpdump' s from client (V1000; 192.168.10.50) and server (s2; 192.168.10.11) while I did a showmount from client to server.

This is a tcpdump on the host (UCS5,s2) while I did a showmount from the client (192.169.10.50) onto it. =============== 20:17:37.099912 IP s2.botree.eu.ssh > 192.168.10.50.36468: Flags [P.], seq 2797746309:2797746497, ack 1003952726, win 501, options [nop,nop,TS val 3564488795 ecr 1860229806]...

=== client-firewall is off. === ping works. === showmount does not show any nfs-hosts on host UCS5. === rpcinfo -p program vers proto port service 100000 4 tcp 111 portmapper 100000 3 tcp 111 portmapper 100000 2 tcp 111 portmapper 100000 4 udp...

Maybe running the MergeIDE_v3 Script to prepare Windows before migrating might help?

Just a reminder: After changing network configurations of a node like adding a bridge, You do have to push the button "Apply Configuration". It was introduced to execute several changes at once - very helpfull, but sometimes an unnoticed stumbeling block in the hurry of daily labor, because...

On PVE7 / UCS5 and two Linux (Mint 20.2 mate) Clients the problem still persists. Any hints?

My freshly installed Win10pVM (from a correct Win10_21H1_German_x64.iso) on a PVE7.0-13 non-production-repro / Xeon E3-1275 v6 / Chipset C236 (fujitsu D3417-B2, no IOmmu in BIOS configurable) recognized the configured network-adapter, but did not use it, an error was shown in the...

Habe OPNsense 21.7.1 in einer VM installiert, Tastaturlayout ist in der >_ Console geändert: us statt de.

Zum ersten Ausprobieren kannst Du irgend einen nicht zu alten PC nehmen. Dann später zum ernsthaften Testen würde ich keinen zu kleinen Host kaufen. Ein all-solid-cap Mainboard mit >= 8x SATA (oder 6x SATA + 2x M.2 oder 1xM.2 und eine M2.PCIe-Karte dazu) für einen kleinen Xeon oder Epyc mit...

I testes OMV5.5 (https://www.openmediavault.org/) smb-shares. They work from inside/outside to inside/outside PVE6.4 without any problem.