Nhoague's latest activity

  • N
    Nhoague replied to the thread Ceph constantly adding PG.
    Yea dont judge, haha how do you paste as code? I try clicking the inline code, or the code formatter, and I paste and it looks like caca. <shrug> Nvmnd ... I figured it out. Bam! root@PVE01:~# ceph osd pool autoscale-status POOL SIZE...
  • N
    Nhoague replied to the thread Ceph constantly adding PG.
    On a side note, while geeking out ... Take a look at this: During rebuild: Using SNMP to watch my CEPH switches, I've seen them hit 2G before, but never really hammering them. We have Micron 5400 Pro disks, and our performance is great! Just...
    • 1782238002296.png
    • 1782238741298.png
  • N
    Nhoague replied to the thread Ceph constantly adding PG.
    Thank you everyone who replied! It's full and back to normal! I keep trying to think of ceph in terms of a RAID in that, why did it rebuild 33 TB when only one node was affected, but the PG really clicked that it rebuilt the entire cluster...
    • 1782237732860.png
  • N
    Nhoague replied to the thread Ceph constantly adding PG.
    It must have heard us talking about it, it just took off and jumped a few PG within an hour!
    • 1782230281377.png
  • N
    Nhoague replied to the thread Ceph constantly adding PG.
    Hello! There were no config changes that I made, however, I had a node kernel panic and I had to reboot it. By the time I got to it, probably 45 min, I suspect the other nodes started rebalancing? So then when this node came online, is it...
    • 1782227820523.png
  • N
    Nhoague reacted to aaron's post in the thread Ceph constantly adding PG with Like Like.
    This looks a lot like the autoscaler doing its thing. Was there any config change before all of this? Check the <NODE> → Ceph → Pool menu to see what is configured there. Possible reasons could be that one of the "target_*" options was set. Or...
  • N
    Nhoague replied to the thread Ceph constantly adding PG.
    Ugh why?! Is it going back through all of the PGs?
    • 1782223242149.png
  • N
    Nhoague replied to the thread Ceph constantly adding PG.
    Ok, it has reached 512 PG in the pools, optimal still shows 256. But, it just feels like its cycling. It hasn't progressed or these havent gone down? How can I throttle the rebalance, as it is affecting VM performance a bit. Or restart it so...
    • 1782222721818.png
    • 1782222525874.png
  • N
    Nhoague reacted to alexskysilk's post in the thread Ceph constantly adding PG with Like Like.
    sorry wrong feature to check ;) ceph osd pool autoscale-status
  • N
    Nhoague replied to the thread Ceph constantly adding PG.
    This is easier to read:
    • 1782150648820.png
  • N
    Nhoague replied to the thread Ceph constantly adding PG.
    You just gave me some relief! I'm sitting here for hours watching it saying how high is it going to go!? You are right: root@PVE01:~# ceph osd pool autoscale-status POOL SIZE TARGET SIZE RATE RAW CAPACITY RATIO TARGET RATIO EFFECTIVE...
  • N
    Nhoague replied to the thread Ceph constantly adding PG.
    I see this: root@PVE01:~# ceph balancer status { "active": true, "last_optimize_duration": "0:00:00.000217", "last_optimize_started": "Mon Jun 22 11:29:39 2026", "mode": "upmap", "no_optimization_needed": true...
    • 1782149489815.png
  • N
    Nhoague replied to the thread Ceph constantly adding PG.
    Update: I was able to catch it when the PG jumped another one and this is in the logs. Appears to me it just wants to make more PG? <shrug> Thanks!
    • 1782147744128.png
    • 1782147751091.png
  • N
    Nhoague posted the thread Ceph constantly adding PG in Proxmox VE: Installation and configuration.
    Hello! Quick recap: I have 5 hosts, 5 x 4TB (enterprise SSD, Micron Pro) per host with Ceph on its own 10Gbp network. All has been running great for about 6 months. Last night I had a server host kernel panic. I rebooted the host. All came up...
    • 1782146268982.png
    • 1782146347505.png
  • N
    Nhoague reacted to bbgeek17's post in the thread Proxmox Virtual Environment 9.2 available! with Like Like.
    Happy to report that we have successfully run our storage-oriented CI/CD workflows against PVE 9.2, and no issues were uncovered during the initial test runs. Congratulations again on a solid release. Sincerely, Blockbridge Blockbridge ...
  • N
    Nhoague replied to the thread Proxmox Virtual Environment 9.2 available!.
    Heck yea! Something else to geek out on now!
  • N
    Nhoague reacted to t.lamprecht's post in the thread Proxmox Virtual Environment 9.2 available! with Like Like.
    We are excited to announce the release of Proxmox Virtual Environment 9.2. This release focuses heavily on platform refinement, stability, and core optimization. Proxmox VE 9.2 is built on the robust Debian 13.5 "Trixie" and ships with Linux...
  • N
    Nhoague reacted to bbgeek17's post in the thread Proxmox Virtual Environment 9.2 available! with Like Like.
    Congratulations! As usual, we will dedicate a separate environment for testing for our mutual customers. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
  • N
    Nhoague reacted to Gilberto Ferreira's post in the thread Proxmox Virtual Environment 9.2 available! with Like Like.
    Great day! Great news... Dynamic Load Balancer is a killer feature...
  • N
    Nhoague reacted to Onslow's post in the thread I ran out of space ... with Like Like.
    Use CODE blocks. This </> icon in the composing menu.
Show older items
Top Bottom
Back