Recent content by narrateourale

One reason could be that the replication feature won't work with native ZFS encryption.

It is only about the repositories that the PDM itself can access to get its own updates. Using the update function for seeing available updates and trigger them from the PDM directly is working either way in my experience.

I recommend you add a feature request over at https://bugzilla.proxmox.com feature requests in the forum might be overlooked

VM should be absolutely fine.

Small but important difference: the license of Proxmox products is primarily the AGPLv3. What you are buying are subscriptions. In order to get updates from the enterprise repository (best tested, recommended for production) you need to have a subscription. With the PDM it is now so, that it...

You can't override how the Proxmox installer does it. You could install Debian and convert that to a Proxmox installation https://pve.proxmox.com/wiki/Install_Proxmox_VE_on_Debian_13_Trixie

If this is for a professional use-case, take a look at the Proxmox Offline Mirror which is Proxmox's official tool to make updates from the enterprise repository available to air-gapped systems and manage their subscription keys...

Sollte eigentlich nicht der Fall sein AFAIK. Eventuell, falls die VMs mit neueren machinetypes gestartet werden, kann sich vlt die virtuelle Hardware aus sicher des Gast OS ändern. Dann musst du, je nachdem was du hast, ein bisschen nachkonfigurieren. Z.b wenn sich die Namen der Netzwerkkarten...

mach backups mit der integrierten backup funktion auf einen netzwerkshare. dann die clean install, und danach kannst du den share wieder als storage einbinden und die backups zurückspielen. backups der gäste beinhalten die virtuellen disks und deren configs. wenn du host spezifische dinge hast...

Disable any power saving features / c-states and/or switch the BIOS to a high-performance/virtualization pre-set. 10/40 Gbit can be a bottleneck if used with fast flash storage! Especially if it shares the physical network with other services! Give Ceph its own physical network. With 3 nodes...

yeah, or you go via the GUI and add a Linux VLAN Device.

I would by now set up the VLANs via the SDN. That makes it easy if you have more than one node. Even with only one physical interface, the config will most likely not change much. The VLAN 209 for MGMT only, should be configured as mentioned. Then you can configure a new VLAN zone in the...

first of, why do you have that many bridge ports? If you want network redundancy, look into bonds! Adding many bridge ports is like plugging in multiple cables to the same switch. If those bridge ports connect to the same physical switch, you got a few ethernet loops... should vmbr0.209 only be...

Hast du mal nachgeschaut, auf einer Node die noch läuft? In /etc/pve/nodes/pve3/qemu-server, bzw lxc sollten die configs liegen. Wenn kein HA aktiviert ist, was die Gäste automatisch recovered, musst du das von hand machen. Z.B. mit mv /etc/pve/nodes/pve3/qemu-server/103.conf...

/etc/pve/qemu-server und /etc/pve/lxc (OpenVZ ist noch da, aber wohl schon lange nicht mehr verwendet) zeigt immer die lokale node. Aber unter /etc/pve/nodes/NODE/... sollte die Ordnerstruktur für alle Nodes da sein. In der GUI sollte aber auch noch ersichtlich sein, welche Gäste auf der...