I added second network card to 2 proxmox nodes. I wanted to use a second separate network for some special needs but i have this strange thing. Keep in mind that for now all 4 cards end up on same switch / no VLANs
I am running a nmap to find unknown devices and it shows the mac from the wrong...
I am restoring the files from a backup now. I was not aware than such fancy drives exist :)
I hope I can still use the disk as temporary storage with different file system
Yes, the host works fine. SSH is OK, even a VM is running from the root disk. I think the interface is with ? just bcs it is timing out on checking the freedisk space for `data2`
Here is the journal
Aug 13 08:12:06 silver kernel: scsi 1:0:0:0: Direct-Access ATA WDC WD20EFAX-68B 0A83...
No it just hangs
The CT from the main disk run fine but on the UI for this node is like this with high IO delay. `data2` is the missing pool
Also if I go to the `Disks` section on the node it is just "loading", nothing to come up.
Hello
I have a second WD Red 2TB disk with ZFS for the large VMs. One of the VMs crashed and could not be started again. I rebooted the whole node and the whole pool is unavailable now.
root@silver:~# smartctl -a /dev/sdb
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.4.195-1-pve] (local build)...
I tried but nothing is happening, no writes after that, just scrub.
I was scared that after I did "move" instead of copy the subvolume from ZFS disk without compression to a ZFS disk with compression, that the free space went from 4GB to 90GB.
But the volume function fine and no corrupted...
I did a restore of a CT that uses also a mount point. There is a warning but I did not expect that it will touch the mount point. After CT restore, the subvolume is destroyed.
zpool history data2 -il
2022-07-04.15:53:54 [txg:9806] destroy data2/subvol-121-disk-0 (165) (bptree, mintxg=1) [on...
Hmmm, you are right. I fixed it. I have bad sectors in my brain, not sure why I was looking the file there :/
/mnt/usb-stick# nano ./efi/boot/refind.conf
Thanks a lot!!!
refind.conf is not not on the stick, that is the problem, it is on the / of the ZFS drive (in /boot subfolder).
When the PC boots from the stick, refind scans all the disks and if it finds a config, it imports the entries. The file contains only boot item to the latest kernel. I need to...
I will probably reinstall the node. But at the moment I would like to fix that file and start the node so I can relocate the CTs. I do have 3 days old backups but would like to have the latest images.
Can you give me the steps? I attached the drive on a different Proxmox node, but not sure how...
I was using https://www.rodsbooks.com/refind/ from USB stick to boot the Proxmox 5. I think the installer was not seeing the disk at the time so I probably installed Proxmox in a different computer and then moved it in the new one.. and booting worked with the help of eEFInd,
Now two years...
Hmmm on mount output it looks like it is updated to smbversion 2.1 after changing the storage.cfg, but the old connections are still active with version 3 (doing smbstatus on the samba server). So reboot on the PVE servers was needed
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.