Recent content by ktdt00

Hopefully what they say about "...no stupid questions..." is true here :) I can't figure out why my VM disk images can't be interacted with via a host shell? This.... root@proxmox:~# zfs list NAME USED AVAIL REFER MOUNTPOINT data-pool 432G 1.33T...

You're right of course... But the same could be said for any of a thousand things/features that are well represented in the GUI. It would also be easy to put a button/check-box on the dashboard that ran a built-in function to do the same. Diffrent strokes... :)

FWIW and posterity I was able to resolve my USB issue during live install. I had noticed during all my googling some obscure references to USB issues and the nouveau driver during debian/ubuntu installations. There was never anything definitive and no real solutions offered other than...

Thanks for the lead. I get the exact same symptoms with a regular ole usb kybd though... I'll mess around with it some more. I found another thread trying to load a newer version of xserver-xorg-input-all... Thanks!!!

Please see attached. At the end of each file you will also see where I unplugged and replugged the USB device. It appearas as though it was properly detected, etc. although after doing so there appeared to be no response on the screen where previously I could see the mouse cursor moving. Note...

Both shells work fine and there are no observed errors. The issue doesn't present until the graphical mode starts. Two other observations: 1) If I use a standard USB keyboard the power light on it goes out right before the GUI starts. If I unplug/plug it into any other USB port the light won't...

Necro-post... Same problem... Dell Precision T5810. I've tried unplugging/replugging to every port across three controllers, installed 3rd party PCI USB card, noapci, noapic nolapic, iommu=soft, iommu=on, intel_iommu=on and every possible bios setting. Debian installs natively just fine. I...

Same problem. Debian 11. Appreciate the dhclient workaround - better than rebooting :)

Maintenance mode or something like it is sorely needed! Thanks to the OP for the workaround!