Recent content by kafteras

No other slot to move it to.. I have also a mellanox 10gbit card. Certainly i dont want the network to not be available

ok this is fixed basicaly.. i used `pcie_acs_override=downstream,multifunction` as kernel options in grub and was able to split them into individual groups. Which in turn means, i can passthrough just the gpu to vm and leave the hba untouched Thanks for all your help @leesteken

You are correct. Group 2: [8086:0c01] 00:01.0 PCI bridge Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller [8086:0c05] 00:01.1 PCI bridge Xeon E3-1200 v3/4th Gen Core Processor PCI...

Ok that actually did it.. I simply removed the hardware pci from webui from the VM.. (it was a GPU) I do not understand why it would also apply on the LSI. Any ideas? i used the hardware ids of gpu for vfio

Yea, its really weird.. I never intended to passthrough this hba. I cant figure out how to make it behave "normally". I will remove the gpu passthrough to the vm and reboot again.

After fresh reboot: 02:00.0 Serial Attached SCSI controller [0107]: Broadcom / LSI SAS2308 PCI-Express Fusion-MPT SAS-2 [1000:0087] (rev 05) Subsystem: Broadcom / LSI 9207-8i SAS2.1 HBA [1000:3020] Kernel driver in use: vfio-pci Kernel modules: mpt3sas ❯ cat...

Thanks again for all the help. I fixed the cat statement, sorry for that. I will try and report back.

Hm. It was like that before testing also I did passthrough a gpu to a VM tho. Maybe i did something wrong and also bind the hba. cat /etc/modprobe.d/*.conf --plain blacklist amdgpu blacklist radeon # generated by nvidia-installer blacklist nouveau...

Most of my services are in lxc containers which i pass the, already mounted, drives directories. So i need the Proxmox as a host to see the hdds on the hba. The VM passthrough was just a test.. Thanks again

Hey, thanks for the super quick response Here is the output 02:00.0 Serial Attached SCSI controller [0107]: Broadcom / LSI SAS2308 PCI-Express Fusion-MPT SAS-2 [1000:0087] (rev 05) Subsystem: Broadcom / LSI 9207-8i SAS2.1 HBA [1000:3020] Kernel driver in use: vfio-pci...

Sorry to hijack this. Have the same problem. VM sees the passthrough LSI's hdds, but when not using passthrough, the host does not see the hdds But how to do this step in detail?

Thanks again for the response Here are the results: root@karsl:~# apt install dbus dbus-session-bus-common- dbus-system-bus-common- dbus-daemon- Reading package lists... Done Building dependency tree... Done Reading state information... Done Note, selecting 'dbus' instead of...

Hey thanks again Here are the results for the commands: root@karsl:~# apt update Hit:1 http://deb.debian.org/debian bullseye InRelease Get:2 http://deb.debian.org/debian bullseye-updates InRelease [44.1 kB] Hit:3 http://deb.debian.org/debian-security bullseye-security InRelease Hit:4...

Thanks for the reply Here are the commands root@karsl:~# apt full-upgrade Reading package lists... Done Building dependency tree... Done Reading state information... Done You might want to run 'apt --fix-broken install' to correct these. The following packages have unmet dependencies: dbus ...

Hello There seems to be a problem with dbus in repos.. The following packages have unmet dependencies: dbus : Depends: dbus-bin (= 1.12.20-3) Depends: libdbus-1-3 (= 1.12.20-3) but 1.12.24-0+deb11u1 is to be installed dbus-daemon : Depends: dbus-bin (= 1.12.20-3)...