jbattermann's latest activity
-
Jjbattermann replied to the thread [SOLVED] Turn 2-disk ZFS mirror into Single Disk setup without loosing data?.Marked it and yeah.. this particular machine and data / containers on that "remaining" disk is literally just a small testing ground, so I will be fine if ... when it will inevitably wither away before SSD prices come back down. Thanks again!
-
Jjbattermann reacted to gfngfn256's post in the thread [SOLVED] Turn 2-disk ZFS mirror into Single Disk setup without loosing data? with
Like.
So glad you got sorted! You may want to add another ssd (even a cheap one) to that pool for redundancy, even though you will be limited in performance to the lower of the 2 drives, at least your data will be more safe. Maybe mark this thread as... -
Jjbattermann reacted to santiagobiali's post in the thread [SOLVED] Turn 2-disk ZFS mirror into Single Disk setup without loosing data? with Like.
Just detach it: zpool detach Swissbits /dev/disk/by-id/<disk-you-want-to-remove>
-
Jjbattermann reacted to gfngfn256's post in the thread [SOLVED] Turn 2-disk ZFS mirror into Single Disk setup without loosing data? with Like.
Just to clarify; I believe that by /dev/disk/by-id/<disk-you-want-to-remove> , the poster refers to the non-working disk, so in your case I imagine that is the second nvme in that image above. This should cause the pool to be left with the single...
-
Jjbattermann replied to the thread [SOLVED] Turn 2-disk ZFS mirror into Single Disk setup without loosing data?.That "worked" and duh to myself!! Thanks @santiagobiali and @gfngfn256 for the quick help.. much appreciated!
-
Jjbattermann posted the thread [SOLVED] Turn 2-disk ZFS mirror into Single Disk setup without loosing data? in Proxmox VE: Installation and configuration.Hi there, quick Q: I have been running a small homelab machine with Proxmox on it for the last couple of years and ran it with two additional quasi data SSDs in a ZFS mirror setup. One of those SSDs have failed and, given RMA/warranty not being...
-
