Recent content by izmeritel

Thank you! Perhaps at the time when I had this problem (with Proxmox and older versions of Windows) this would have helped, but I solved the problem from the other side: I found and eliminated the reason why I needed to use only the old version of Windows and now everything works on any system.

And so, to summarize: 0. 187 version of the drivers did not help. Further down the list, Spice-Guest-Tools were used everywhere instead of drivers with ISO. 1. When using SCSI as a disk subsystem, neither the Balloon driver nor the VitrIO Serial driver is installed. 2. When using SATA as a disk...

Negrutiu, The problem isn't getting the system up and running (7 or 2008 R2), it installed and run. The problem is to get rid of the yellow marks in Device Manager (yes, I'm a perfectionist))). And in order to use, if possible, all modern virtualization developments (ballooning, guest agent...

No, the same results. Apparently it's in the hardware, since everything works for others. I tried options with IDE, SCSI and VirtIO Block (unlikely, but suddenly this was the case) - the same thing (VirtIO serial driver is installed with code 10, Balloon with BSoD). I conclude that something is...

Rainerle Thank you for reply. I have almost the same settings, except for a few non-essential ones, it seems to me: Ignore the OS type: I've already experimented with this in an attempt to solve the problem. Originally was 7/2008 R2. My only question is, which version of VirtIO ISO are you...

Unfortunately with your recommended ISO (137) the same problems on 7/2008 R2. P.S. Perhaps some Windows update is needed for the drivers to work correctly? My 7/2008 R2 distributions are standard, with SP1, without any further updates.

Anyone? What iso files (with VirtIO drivers) have you used recently when installing the 2008 R2?

I have installed Windows 2012 R2 and all drivers (Balloon, VirtIO Serial driver). Everything got up without any problems. Thus, this once again confirms that something is wrong with the support of Windows 2008 R2 and I need to find the last ISO-file suitable for 2008 R2. I agree. I indicated...

Thanks for your feedback. Stable (0.1.185) is also not working (i get same errors). No errors with USB passthrough. I add USB device on Hardware page (Vendor/Device ID or Port, no matter), starting guest VM and nothing happens (no USB-devices in My Computer).

Hi, guys! Can you tell me what latest VirtIO drivers support Windows 7/2008 R2? I trying install drivers from latest iso (0.1.189), but when installing drivers for: Balloon - I get a BSoD (balloon.sys+wdf01000.sys) PCI Simple Communications (VirtIO Serial driver) - driver installed with Code 10...