Recent content by houbidoo

Hi, Rollback to ifupdown2=3.2.0-1+pmx4 worked. I saw some other post where this worked. Unfortunatly i cannot do anymore testing now.. Anyone some idea if it will be fixed in next versions? Or do we have todo some config change somewhere to have a "normal" behaivour? For information: The...

Hey all, I just upgraded a three node cluster (new set up) and the cluster links (2* 10G LACP) stopped working. I can see that the MAC-Adresses of all cluster links (2* 10G, LACP Bond, Bridge) on the three servers are identical now. After new installation...the same. It is just the cluster...

Wie es so häufig ist: historisch gewahsen...das ganze war mal nicht als HA Cluster im betrieb, aber tut nun ja nichts zur Sache. Welche Logs wären interessant und wo find ich diese, dann kann ich gerne alle Infos zur Verfügung stellen.

If you tell me location and what to look for of additional logs I can get the info

Hallo zusammen, Wir haben ein unangenehmes Phänomen: Auf unserem Proxmox HA-Cluster hängt sich das Backup eines einzelnen LXC (LibreNMS) andauernd auf, nur dieser. Der Zustand der VM ist „undefiniert“, via Konsole kein Output, CPU und RAM nahe Null, HA sagt aber started und der Container ist...

Did find the solution: In the /etc/network/interfaces the following statement appears on the servers that were not working anymore after upgrading to 7.0 auto eno1 iface eno1 inet manual auto eno2 iface eno2 inet manual auto eno3 iface eno3 inet manual auto eno4 iface eno4 inet manual...

Hello, Yesterday I upgraded 2 identical servers (Supermicro with Intel i350 NICs onboard) to Proxmox 7.0. The Servers are connected via 2* bond interfaces to a Juniper Switch with ae Interfaces and LACP configure). A third server with different hardware was upgraded, too. One Server is working...

soooooo, good news: It works with the following config: Host ## ####### root@host:/# cat /etc/network/interfaces auto lo iface lo inet loopback auto vmbr0 iface vmbr0 inet static address 37.xxx.xxx.172 netmask 255.255.252.0 gateway 37.xxx.xxx.1 bridge_ports eth0 bridge_stp off bridge_fd...

do we need some proxy arp or something, too?

It's one of the VMs.... I tried to use vmbr0... (even if I change the interface-name from eth0 to vmbr0 at the VM it is not working) I see packets going to the interface when I ping from outside, when I try to ping from the vm to outside I can see packets on the interface, too.....BUT ALL...

Good morning, Thx for quick help. It doesn't work right now.... Config (host): root@host:/home/# cat /proc/sys/net/ipv4/ip_forward 1 root@host:/home/# cat /etc/network/interfaces auto lo iface lo inet loopback auto vmbr0 iface vmbr0 inet static address 37.xxx.xxx.172 netmask...

Hey Forum, I need help with my basic network setup. Situation: I have a Root Server @ Netcup DataCenter with working Proxmox 4.2 Setup on the host. The Server has a Main IP 111.111.111.111 Netmask 255.255.252.0 Gateway 111.111.108.1 For my VMs i ordered 3 additional IP-Addresses. These...

Hello guys, i am relativly new to proxmox and just installed and configured my host and virtual mashines. Host: dell r410, 2x xeon cpu, 12 GB ddr3, raid 1, Proxmox 3.4 Virtual mashines: 7x openvz with Debian wheezy Running the iptables firewall What i want to do: I like to have one...