Hello. Just to be precise : in case of no quorum, and if HA is unconfigured, then no host is rebooted and no VM is shutdown. You would simply be unallowed to do any modification on state (configuration, VM stop/start and so on).
But if HA is...
Hello. The problem could be located to a kernel crash using bridges. But as seen many times in this forum with small form factor units, it rather comes from the processor. Can you try to :
- re-enable bridges and reproduce the problem
- put a fan...
Adding to MarkusKos comment you might also want to read @UdoB great writeup on using Ceph in small custers:
https://forum.proxmox.com/threads/fabu-can-i-use-ceph-in-a-_very_-small-cluster.159671/
Basically you will need fast network (10Gb/s...
if you have the budget for that hardware, dont waste your time with hard disks, use ssd's. 25G nics (LACP bond) for ceph would be a good idea.
storage/networking will be your main bottleneck here, especially with ceph.
check the official ceph...
It is rather a controversial question.
For me : do not do that. Data and disk integrity will be involved in mid term. In order to avoid this, you will have to tune the installation and the swap and it
will lead to a custom system to maintain.
As...
Hello, login and password is entered at GUI login.
To my knowledge, no password can be set when using web shell to connect to a Proxmox Virtual Environment host.
Oh that is sad...
But you get the point. Installation is rather easy.
Upgrades is rather tricky and need administration skills.
Yunohost is a great project too, with upgrades.
But still, sometimes it fails.
I prefer to keep it KISS : one VM per...
Ok so really no log at all and nothing on the console...
I never had a problem like this.
You could try to use sysrq to get some info :
https://www.kernel.org/doc/html/latest/admin-guide/sysrq.html
But I won't be able to help at a low level as...