Recent content by einmalacht

Hello, I did a new Installation of 5.1

Hello together .. i can confirm that Installation of Proxmox 5.1 is running now . The CPU stuck error is gone. But i cannot start a KVM Machine ... Could not access KVM kernel module: No such file or directory failed to initialize KVM: No such file or Directory when i will load the Intel_kvm...

Hello together, I am using Proxmox for a long time on some older HP Servers. But when i upgrade from VE 4 to VE 5 the system wont boot and bring the following message: NMI watchdog: BUG: soft lockup - CPU#0 stuck for 23s! When i boot the old Kernel from VE 4.4 the system will boot without...

After a few Months im working again on ipv6 but until now it is not working ... When i flush dev eth0 and bring it up again the following error appears: /etc/network/if-up.d/vzifup-post: 5: exec: /usr/sbin/vzifup-post: not found run-parts: /etc/network/if-up.d/vzifup-post exited with return...

I only configured the interfaces file like in my first post. And the problem is that my eth0 dont become my IPv6 ip adress which i configured in the interfaces file. Ifconfig eth0 shows only ( wiht the loopback IPv6 ): eth0 Link encap:Ethernet Hardware Adresse 00:19:bb:c7:XX:XX inet...

ifdown eth0 ifdown: interface eth0 not configured ifup eth0 RTNETLINK answers: File exists Failed to bring up eth0

Hi thanks for your fast reply. The ifdown eth0 command bring the following message: ifdown: interface eth0 not configured but ifconfig eth0 up / down is working.

Hello togehter, i want to use IPv6 and IPv4 at the same time. When i allocate the IPv6 adress on the running machine , then it worked for me. But when i reboot the machnine only the ipv4 adress is used. When i set the IPv6 Config at the top of the /etc/network/interfaces file, then i have only...

Hello together, the solution above worked for me very well until i update to Proxmox 4 :-) Now i cant build the xtables addon . The following Error appears debian/rules:59: recipe for target 'override_dh_auto_clean' failed make[1]: *** [override_dh_auto_clean] Error 2 make[1]: Leaving...