ducs4rs's latest activity

  • D
    ducs4rs replied to the thread [SOLVED] Kernel Boot Parameters not working.
    after adding the disk back in, there are no errors. Also I found this was the optimal cmdline. I tried othter options but they cause passthrough to fail root=ZFS=rpool/ROOT/pve-1 boot=zfs rootdelay=15 quiet iommu=pt pcie_aspm=off console=ttyS1...
  • D
    ducs4rs replied to the thread [SOLVED] Kernel Boot Parameters not working.
    I removed the disk that had grub, rebooted, ran proxmox-boot-tool refresh, It worked. I am going to format the pulled disk and recreate the rpool mirror and see what happens. Thanks. I will mark this as fixed.
  • D
    ducs4rs replied to the thread [SOLVED] Kernel Boot Parameters not working.
    I have a mirrored rpool with two disks, when I run proxmox-boot-tool status I get this proxmox-boot-tool status Re-executing '/usr/sbin/proxmox-boot-tool' in new private mount namespace.. System currently booted with uefi 799C-C349 is...
  • D
    ducs4rs replied to the thread [SOLVED] Kernel Boot Parameters not working.
    I had a typo in my post. I did edit /etc/kernel/cmdline. I am using systemd-boot and have done proxmox-boot-tool refresh, but the parameters are not being set.
  • D
    ducs4rs posted the thread [SOLVED] Kernel Boot Parameters not working in Proxmox VE: Installation and configuration.
    I am trying to set UEFI kernel boot parameters but its not working. I am running 8.4.19. efibootmgr -v output is: root@pveprod:/boot# efibootmgr -v BootCurrent: 0006 Timeout: 1 seconds BootOrder: 0004,0006,0007,0001,0005 Boot0001* Hard Drive...
Show older items
Top Bottom
Back