Recent content by dragon2611

If there's an issue with a nodes network connectvity ceph will spam the console with connection error messages, this makes it very awkward to work on the console to try and fix the underlaying issue, Also some IPMI's don't always translate keyboard commands very well so switching TTY is not...

Seems to be back alive now.

Is download.proxmox.com and enterprise.proxmox.com dead at the moment? Can't seem to reach either of them and have tried from various locations/ISPs

Check the featureset for the SAN if you have more than one from the same vendor (may also need to be from the same series/model) they do sometimes offer replication features within the san itself. At which point you'd then need to replicate the configuration between the proxmox clusters.

It shows up on a speed test as well as downloading, but when it next happens I'll try a wget to /dev/null. I did check the network utilisation at the time but didn't think to check the disk queue, that said the 2VM's are on different hosts, and I've expected that if it was the SSD causing it...

I have strange issue with a couple of cachyos (arch) based virtual machines where once they've been running for an unknown amount of time the download/downlink (TO the VM) is terribly slow. (They will struggle to pull above 30Mbit/s) The hosts are connected by 2x1Gbit in LACP as it's my...

Is there any way to keep the NICS the same when importing from vmware? It seems on a lot of Linux distros and windows versions even if I keep the same NIC type and MAC it sees it as a new device so requires me to login on the console and change the network settings to get the VM back online.

I installed that in the container then transcoding.etc starting working This is with an arc a310 the host still has the version of intel-opencl-icd from the repo.

I had stability issues and went with iscsi to a truenas vm which also had stability issues. Turned out to be something to do with rke2 and I think it was almalinux I was using initially for some reason those vms kept dropping network long enough to bork the storage connections. K8s via...

Might be worth adding a step to enable maintenance mode https://pve.proxmox.com/wiki/High_Availability#_node_maintenance to the instructions. I forgot to do this and had one of the nodes get fenced mid-upgrade which caused some "fun" which then required me to use the OOB to get it back online...

Proxmox 7.3-6, Ui Displays : Gui shows listing images failed: (2) No such file or directory (500) on EC pool when trying to list images on an EC pool I suspect it's trying to List the EC pool instead of the corresponding metadata pool This works on a new install that's still on 7.3-3

Just installed Proxmox 7.3-3 on 3 nodes (Haven't updated yet as hopefully we're subscribing to the enterprise repo) CEPH 17.2 across 3 nodes connected by 2x10G LACP Was getting a lot of the following messages in the CEPH logs 2023-03-09T10:50:39.317446+0000 mon.localhost (mon.0) 70 : cluster...

For anyone who doesn't care about dataloss and loves to live on the edge. In the example below the pool is called "danger" ceph config set global mon_allow_pool_size_one true ceph osd pool set data_pool min_size 1 ceph osd pool set danger min_size 1 ceph osd pool set danger size 1...

Has anyone tried running Proxmox on a 12th/13th gen Intel cpu with both P and E cores? I'm guessing as these are more consumer CPU's perhaps not, but I was tempted to build something for the "homeserver". At the moment I have a cluster of very slow low power i3's to test CEPH on but I could...

Just wondering what people are doing for kubernetes PV's when running K8s/K3s in VM's on-top of a proxmox cluster. I was thinking of exposing PVE-CEPH to rook as an external cluster and doing it that way , but I'm not sure if that's likely to bite me later or if it will cause issues with...