Recent content by Donovan Hoare

I updated my entire cluster to 8.4.1 This weekend ill restart a node and see if it happens again. If it does ill post as much info as i can

Gooda day as per below screenshot. Im running 8.3.5 This has happened twice now. This morning i needed to restart host p8. When i did that the server did not come online in the cluster. It originaally had a RED X at its slot. Then on all nodes went into this state. I cant manage the machines...

Good Day All. I would like to increase my lockwait timeout from 180 mins to 600 mins Noone says exactly where to edit some say add --lockwait to vzdump However i have nothing in that file. Chat gpt says to edit nano /etc/pve/datacenter.cfg backup-lockwait: 600 however another post says it...

Thanks very much tht was it. So i restarted the OSD that showed up in the above post waiting for backfilling. Then it continued and is now complete

Thanks, But the backfilling doesnt seem to be happeing either. Its been hours and therre is no prgress from my 1st post ceph -s cluster: id: 32e62262-67a6-4129-9464-773375643266 health: HEALTH_WARN 61 pgs not deep-scrubbed in time 42 pgs not scrubbed in...

Good day all. As far as i can tell my ceph is not scrubbing or backfilling since i added new OSD's to the cluster as recovery time is now 0bytes for 2 days ceph -s cluster: id: 32e62262-67a6-4129-9464-773375643266 health: HEALTH_WARN 61 pgs not deep-scrubbed in time...

Good morning all I have a synology nas. Where i have bonded the 4 Gigabit ports. the Ip address of the interface is 192.168.14.231 this mounts perfectly and i can use the storage. However i created a new cluster with Ceph that has 10GB Backend. So i put a 10GB Card to the nas and configured...

OK i found what i was doing wrong. When mounting i was trying to connect to the ip address of the metadata servers. However when i changed it to one of the ipaddresses of the monitor servers. it worked.

Good day all. Sorry for all the noob questions. I have ceph running on my 6node proxmox cluster. After some other noob questions ive asked over the last few days. its running nicely. I would like to now add a cephfs share to a vm Assumption : when i add to a vm, it woule be like mounting a NFS...

Thank you very much it worked great And VM's are MUCH faster

Ok So i went ahead. So exact order. You edit the file on any node. then restart the services on each node one by one, each time waiting for the cluster to become heealthy / or no yellow degrade items. then you do the same with the monitors then after the monitors the managers

So To confirm hwo todo this. on EACH node i edit /etc/pve/ceph.conf i change public_network = 192.168.14.21/23 to public_network = 10.0.45.21/24 save the file then run systemctl restart ceph-osd.target Then do i restart the 1st node then delete and create a mon, then restart the second then...

Good Day All. Im new to ceph. i have set up a 6 node cluster. Its a mixture of SSD AND sas drives. With the sas drives i use a ssd partition for the db. Now what im experiencing is that my VMs are slow. Boot is slow Opening programs are slow etc etc. the 10.0.45.0/24 network is 10Gig the...

Good Day All. I have just set up a 4 node cluster with Ceph. So a few Questions to help me understand what is happening 1. I know data is stored over multiple servers. However, when I run a VM is the "Hard Drive" on the local machine copy for IO. Or does the VM have to read and write over the...

I dont see dit thread, its normally there