dmembibre's latest activity
-
Ddmembibre replied to the thread Failed to set VSI 18 as the default forwarding VSI on Intel E810 4-port 25G and solution.HI, The issues reappeared today, even after updating the driver. Any suggestions?
-
Ddmembibre posted the thread Failed to set VSI 18 as the default forwarding VSI on Intel E810 4-port 25G and solution in Proxmox VE: Installation and configuration.Hello, We have a 7-node cluster Proxmox VE 9.1 using the Intel Ethernet Controller E810-C for SFP (Intel ice driver). We encountered a critical issue in our 4-port network bond configuration, leading to the following repeated kernel errors on...
-
Ddmembibre replied to the thread Proxmox 9 HA Issue: Node stuck in "old timestamp- dead" after apt dist-upgrade.Hi! Last week we removed all HA resources and updated the packages. A moment ago I started adding the HA resources again and the master was listed as 'old timestamp - dead'. This is the status of its watchdog. The master has changed and other...
-
-
Ddmembibre posted the thread Proxmox 9 HA Issue: Node stuck in "old timestamp- dead" after apt dist-upgrade in Proxmox VE: Installation and configuration.Hello, Yesterday, one of the nodes in our cluster got stuck in the "old timestamp- dead" status. This occurred immediately after I performed an apt dist-upgrade, which included updates to the following packages: The only solution I found to...
-
-
DFYI, a fix for this issue is being worked on: https://lore.proxmox.com/pve-devel/20250903142238.116492-1-f.ebner@proxmox.com/T/
-
Ddmembibre replied to the thread Live VM Migration fails.If I set the MTU to 1500 on the network interface over vmbr2, the migration still fails, and the logs show that it attempts to set the MTU to 9000 The bug report you're referencing is from 2017 and has also been closed. Are you going to...
-
-
Ddmembibre replied to the thread Live VM Migration fails.I've found the following: A machine with its network on vmbr2 fails to migrate, but if I use a bridge created with SDN (without touching the MTU), the migration from Proxmox 8 to Proxmox 9 completes without issues. A machine with its network on...
-
Ddmembibre replied to the thread Live VM Migration fails.Hi, Full log Sep 02 11:31:48 proxovhgra-2401 kernel: tap1001002i0: entered promiscuous mode Sep 02 11:31:48 proxovhgra-2401 ovs-vsctl[2182816]: ovs|00001|vsctl|INFO|Called as /usr/bin/ovs-vsctl del-port tap1001002i0 Sep 02 11:31:48...
-
Ddmembibre replied to the thread Live VM Migration fails.Hello, I'll explain my situation a bit better: We have a 9-node cluster, and until yesterday, VM migrations were working normally. I updated one node to Proxmox 9, and any VM I try to migrate to it fails with an error. Yesterday, I tried...
-
Ddmembibre replied to the thread Live VM Migration fails.Hi, i have the same error Migration of a VM with Q35 works fine, but a VM with Default (i440fx) ends with errors. () 2025-09-01 15:25:31 starting migration of VM 146245 to node 'xxxx' (xxxx) 2025-09-01 15:25:31 starting VM 146245 on remote node...
