Recent content by DBS

You can edit (With great care) the config file of your VM, which is located in /etc/pve/qemu-server Put an # in front of the line containing you CD drive Regards, Ronald

Have you consider a VMware server conversion as possible an option? I've used this option recently with a good result. Through the storage option a connection with the VMware server is made and an import can be started. In your situation you may need an extra storage (or local storage) You do...

You are right, apologies. Regards, ronald

I do use the fiberchannel to access the storage, this is a 10Gb network (seperate up and downlink) Synology is capable of sharing folders using the NFS protocol, in this way the cluster nodes have access to the shared storage. The synology itself can create the snapshots an external backup...

Is this helpfull? https://www.reddit.com/r/Proxmox/comments/zocbjt/help_with_booting_vm_on_proxmox/ "So after playing around with it, whenever i remove virtio-win CD drive it goes back to working"

Have you consider a VMware server conversion as possible an option? I've used this option recently with a good result. However. you do need a functional VMware server and a proxmox server running version > 8.2.2

Hi Udo, it was just a f.y.i. to mention it is happening more. No help needed for this one ;-) Regards, Ronald

Did you mount the iso in the iLO itself or did you use the mount media in the Remote Console? Regards, Ronald

Hi Udo, I do have a similar problem but more weird. Situation: 1 cluster with 3 nodes and 2 stand-alone nodes. Cluster is running 8.0.2 Stand-alone is running 8.2.2 Al servers are in the same subnet and do have the same gateway. The Cluster do have internet access. Stand-alone don't have...

Also check the used boot devices in under options. Regards, Ronald

If it really won't work I can provide you with a clean installed pfsense VM which you can configure yourself? Regards, Ronald

Hi mugopain, that should do the trick! @allanl, I run 2 pfsense VM's in production and 1 in a test proxmox environment without a problem ( for a couple of years.) Maybe the solution from mugopain will work for you as well? Regards, Ronald

Hi Allanl, Please correct me if I'm wrong but it seems that the initial configuration is not finished. first, install pfsense Complete configuration in the Terminal console (DOS box) This means, configure the LAN and WAN network choices and skip the vlan questions, then you wil end up with...

I already suspected that the error was in the vlan config, and you solved it yourself :) Regarding the pfsense firewall, if you need more info, please send me a PM, I do use this now for more than 10 years and I love it.

Can you please provide the network config of your Proxmox network vmbr0 and vmbr1? (screenshots are fine) Are you familiar with pfsense and how to configure? I assume, as you configure the vmbr1 on bridge_port eno1.30 you have 1 NIC present? Regards , Ronald