Recent content by daemonix

Is there a solution to this? On Proxmox card works fine. Passthrough to a linux vm not.. /opt/MegaRAID/storcli2/storcli2 /c0 show personality CLI Version = 008.0013.0000.0007 Mar 13, 2025 Operating system = Linux6.8.12-10-pve Controller = 0 Status = Success Description = None Personality...

no ideas?

Since installing a truenas core with 6 NVME passthrough (zfs pool created in truenas), everything was ok. 6+months (but no reboot) I had to reboot the server (not just the VM) and now I cant boot the VM with the attached NVMEs. Any ideas? I though at some point that proxmox zfs tries to...

timeout of 2100 (sec) worked!

With the 300GB running I have 500Gb+ free. No ZFS on this system. Do I really use a high enough timeout to mitigate the problem? I havent timed the 300Gb startup :S (is there a log about it?)

Hi all, I have a 1Tb RAM, dual EPYC 7543 system running Linux 5.15.74-1-pve #1 SMP PVE 5.15.74-1 (I cant update at the moment due to a project but its just an internal box with no externally accessible points) I can start the VM below with up to 300-ish GB RAM. But times out with 400+GB and my...

true. to be honest Im still not 100% sure I cant live without them... Ill internal network is ok with 9000 (hopefully). Its all unifi. from vbr0(+vlans) for the pfsense and out its 1500. So I was thinking that this might not be the best idea. Ill re-test.

Hi, I have a 10Gbe Unifi network linking proxmox's (one DAC SPF working as bridge - vlan aware) TrueNAS, pfsense and some other VMs with the important workstations. With some initial testing I had a throughput limit with the default MTU and truenas (SSD vDevs) so I enabled jumbo frames in the...

OH NO. You havent got the correct card for what you need to do :) Sorry Your card is running fine! I see no error in your Device manager. A40 is a compute card. NOT a "graphics card". The "A40" graphics card is called A6000. I know its confusing as you see DP connectors at the back, but I...

Are you talking about Windows as Compute only right? (NO graphics mode!)

Im puzzled with your problem. I have moved to some ASUS servers too. dual 7763 too. I havent added any GPU yet but I might do in a couple of weeks. All my boxes at the moment work with bios defaults + IOMMU (4g decoding is default I think). I _DO NO_T have vGPU or other slicing/licensing so I...

hmm... I honestly dont remember. I was pissed and I edited setting without thinking much... I dont think gigabyte servers have a way to export in text the bios config?! no?? I have two gigabyte server with passthough working. The one above was a problem with A40. my other system has 8xA30 and...

just for future reference: Even though my IOMMU, 4G decoding and SV-IOR etc setting where ON (Gigabyte Epyc Milan chassis) I have to turn ON other random settings (honestly not sure...) to get it working... (I know, not the best troubleshooting but at some point I lost track)

hi all, I cant get around this code 12. I run a similar setup, Epyc and 2x A40s (gigabyte MB). On linux I dont see any problems but on windows I get the code 12. IOMMU is ON etc. (I have followed the reddit passthrough guide etc). My grub line is: "quiet amd_iommu=on pci=realloc...

nop. I tried to change it manually but nothing...