Recent content by chalan

i need to install proxmox with raid1 (mirror) and use only first disk... i will add the second hdd later after i solve some problems with backup.... but the installer wont let me choose only first disc(second "do not use")... weird thing is that the installer let zfs raid0 (stripped) install...

tryed to change prefix but no luck, i am helpless

ok so i try to zpool import but it complains that there is a damaged file... i dont care about the file i just need to import that pool again, install grub and boot so i can can rescue as many datas as posible... how can i do this???

i have joined new hdd, so now i have both disks and after boot i got this in grub... should i try to change only the prefix and trying insmod normal? but i got only 2hdds in sata3 why is there hd2 and hd3?

is there ANYBODY who can help me with this? really don't have a clue how to start... i NEED to rescue the data... i don't understand how can this happend on a normal file system... its starts with disc failure... no problem with data, only fuses on both HDDs has gone (mirror pool)... one HDD...

ok after ctrl+D and abort instalation i was able to end in prompt with zpool command, BUT zpool import -a cannot import 'rpool' : no such pool or dateset Destroy and re-create the pool from a backup source. is this serious? how could i damage the rpool???? what can i...

things cat more complicated.... i didn't made the backups (ordered new 4TB usb drive, but still dont have it), i needed the server to reboot and ended with grub unknown fille system... i try to boot from both disks but no luck... i removed the new one and try to boot with the old, which was...

i dont understand the error, i have checked the qcow2 file root@pve-klenova:~# qemu-img check /var/lib/vz/images/200/vm-200-disk-2.qcow2 No errors were found on the image. 16777216/16777216 = 100.00% allocated, 0.04% fragmented, 0.00% compressed clusters Image end offset: 1102665351168 no...

after i ran scrub root@pve-klenova:~# zpool status -v pool: rpool state: DEGRADED status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire...

after disk failure i have done this steps... 1.) zpool offline rpool /dev/disk/by-id/wwn-0x5000cca269c4bd82-part2 2.) From the WebUI, Servername -> Disks -> Initialize Disk with GPT (/dev/sdb) 3.) sgdisk --replicate=/dev/sdb /dev/sda 4.) sgdisk --randomize-guids /dev/sdb 5.) grub-install...

can somebody please help me with the the degraded pool? see above... i have make thease steps and still have degraded pool... 1.) zpool offline rpool /dev/disk/by-id/wwn-0x5000cca269c4bd82-part2 2.) From the WebUI, Servername -> Disks -> Initialize Disk with GPT (/dev/sdb) 3.) sgdisk...

what does the permanent erros means? and how to get rid of this: replacing-1 DEGRADED 1008 0 0 12706416511818272176 OFFLINE 0 0 0 was /dev/disk/by-id/wwn-0x5000cca269c4bd82-part2 root@pve-klenova:~# zpool status -v pool...

Do you think WD GOLD 4TB are very slow disks?

is this normal??? 54,6G scanned out of 1,09T at 14,2M/s, 21h10m to go...??? sata3 disk in sata3 ports with sata3 cables... all vms stoped...

ok i have done zpool replace rpool 12706416511818272176 /dev/disk/by-id/wwn-0x5000cca269e871c7-part2 now i have root@pve-klenova:~# zpool status -v pool: rpool state: DEGRADED status: One or more devices is currently being resilvered. The pool will continue to function, possibly in a...