celemine1gig's latest activity

  • C
    celemine1gig replied to the thread e1000e eno1: Detected Hardware Unit Hang:.
    See Erratum Nr. 7: https://www.intel.com/content/dam/doc/specification-update/82571eb-82572ei-gbe-controller-spec-update.pdf Just because it uses the "e1000e" driver does not necessarily mean, that it is affected by this bug. You have to...
  • C
    celemine1gig replied to the thread Hardware für Anfänger.
    ThoSos Hinweis bzgl. der Überprüfung der Machbarkeit und Sinnhaftigkeit deines Vorhabens, ist sicher eine gute Idee. Davon abgesehen kann ich dir nur von der Idee des Mini PCs abraten. Wenn du UNBEDINGT ein sehr kleines Gerät willst und dir...
  • C
    celemine1gig replied to the thread e1000e eno1: Detected Hardware Unit Hang:.
    There is no "Q246" chipset, but only a "C246". And as mentioned, the original bug only should still affect older chipsets/systems (list see in my previous comment). So, if the issue persists and was not fixed with a BIOS update, then contact...
  • C
    celemine1gig replied to the thread e1000e eno1: Detected Hardware Unit Hang:.
    Some people still seem to hope for a fix for their i218 and i219. Sadly this is what big blue documents: Seems like for other platforms it was somehow fixed. However, on the listed ones, disabling TSO is the only known workaround (there is no...
  • C
    celemine1gig reacted to wrobelda's post in the thread 2.5GbE NIC - Intel or Realtek? with Like Like.
    Sorry, these lists are heavily outdated. Also, anyone who cares about ASPM and power consumption overall might very much consider i226V, since it consumes a mere 1.3W at transfer...
  • C
    celemine1gig replied to the thread Asus NUC14, bei 2x NVME kein Nic.
    @huitheme: You are posting in the German-speaking part of the forums. Das erwähnte Verhalten klingt schwer nach einem Firmware-Problem. Eventuell mal bei Asus nach einen Update für den i226-Controller fragen. Hier gab es in den letzten 2 Jahren...
  • C
    celemine1gig replied to the thread iGPU Pass-through - No console shell with q35 but works fine with i440fx.
    Did you already try to vary the exact "q35" version, that you are using? You can use "q35" which just is the latest, but you can also choose specific versions of it. Maybe the issue started with one Version of the Maschine Definition.
  • C
    celemine1gig replied to the thread Proper way to install Proxmox in UEFI mode..
    And if he does that, he'll once again see nothing from his GPU until a supported OS took over.
  • C
    celemine1gig replied to the thread Proper way to install Proxmox in UEFI mode..
    Your missing GPU display output is completely untelated to the systems' ability to perform a full UEFI boot. And if you set your system to boot Legacy-first, then why should it boot Proxmox in UEFI mode? The Proxmox installer can perform a...
  • C
    celemine1gig replied to the thread Proper way to install Proxmox in UEFI mode..
    You are using a dedicated GPU, right? If yes, which one exactly? If it has no UEFI spec conform GOP-support, then you simply get no Video output in native UEFI or CSM-mode with Video output set to "UEFI".
Show older items
Top Bottom
Back