bobmc's latest activity
-
bobmc replied to the thread Seeking advice: New storage upgrade configuration (host zpool vs. guest NAS via passthrough).Quite valid. Of course there are arguments for (simplicity, efficiency) and against (modification of the host environment, complex...
-
bobmc replied to the thread Unsupported SFP+ module.The Intel branded ones should work as the hardware vendor of the NIC is Intel X520. An email to FS.com support will confirm. Not sure...
-
bobmc replied to the thread Seeking advice: New storage upgrade configuration (host zpool vs. guest NAS via passthrough).Nonsense, it may not suit everyone or all circumstances, but it's an approach as valid as any other. Have you heard of hyperconvergent...
-
bobmc replied to the thread Network/Bridge Help..Before anything else, you don't get '20Gbit/sec' between pc and server so don't be disappointed in your transfer speeds. However, if you...
-
bobmc replied to the thread Loss of remote internet access.Accessibility via TeamViewer only proves the VM is still running "when restarting the router proxmox also performed a restart of the...
-
bobmc replied to the thread Traffic from one LXC container leaks to other containers.Your network setup seemed sensible, and just out of curiosity I generated traffic to one container while running wireshark in the other...
-
bobmc replied to the thread Traffic from one LXC container leaks to other containers.could you post your /etc/network/interfaces and your config file for lxc1 and lxc2 (/etc/pve/lxc/xxx.conf)
-
bobmc replied to the thread Add multiple IPs of the same network to a LXC.the PowerDNS documentation suggests you can bind the service to a dedicated IP so it should be possible.
-
bobmc replied to the thread [SOLVED] Network-Abuse mac adreess Proxmox.or ask your hoster to allow 1 additional mac-address for vmbr0 - might be the easiest way
-
bobmc replied to the thread [SOLVED] Network-Abuse mac adreess Proxmox.I think you need to put your public IP on directly on eno3 and update your ip-tables nat config to use eno3 instead of vmbr0
-
bobmc replied to the thread vm use /22 netmask can not ping other.1. can your proxmox 6.2 server (192.168.103.110) ping other IP like google.com? 2. can you post your etc/network/interfaces file?
-
bobmc replied to the thread Ubuntu VM' is does not have network access.so what does a traceroute to 8.8.8.8 from a) windows b) centos c) ubuntu look like?
-
bobmc replied to the thread Ubuntu VM' is does not have network access.But you're not enabling ip forwarding post-up echo 1 > /proc/sys/net/ipv4/ip_forward and you're not routing via a 'real'...
-
bobmc replied to the thread structuring network - proxmox and pfsense.If LAN1 is local to that node (i.e it has no physical connection) then DHCP broadcast is not going to reach other nodes. I don't if or...
-
bobmc replied to the thread Ubuntu VM' is does not have network access.you have your public IP and gateway on enp4s0 *but* you also have this IP assigned to vmbr0 (...ok....) but then vmbr0 is not linked to...