Recent content by Bitzor

  1. B

    Update Problem | lvmetad not found

    ffs, i'm such a idiot. It works now. Such a shame for me.. Thanks fabian!
  2. B

    Update Problem | lvmetad not found

    Ah okay, interestingly, I don't have lvm.conf in the path /etc/lvm but there is an "lvm.conf.dpkg-dist". Just did cp oldfile lvm.conf then dpkg-reconfigure ... again and everything works fine. But I'm just wondering what it says: The following packages have been held back: proxmox-ve...
  3. B

    Update Problem | lvmetad not found

    I'm a little embarrassed now^^^ Unfortunately, I am not so familiar with it & still in the practice phase. I don't quite understand how to insert or where? Sorry for the question! Thank you very much!
  4. B

    Update Problem | lvmetad not found

    Leider finde ich nichts Hilfreiches auch das hatte ich schon Überprüft gehabt. Resultat nochmal:
  5. B

    Update Problem | lvmetad not found

    Guten Abend Community! Eigentlich bin ich Wunschlos Glücklich mit meinem Setup welches auch komplett Funktionierte. Nur bin ich auf einen Fehler während des Update Prozesses gestoßen & ich weiß leider nicht, wie ich diesen beheben kann. lvm2 (2.02.168-pve5) wird eingerichtet ...
  6. B

    [SOLVED] LXC 2. eth Schnittstelle nimmt keine ipv4

    Bei der Sache mit rc.local ging es mir eher so nur darum, ob das Interface dann bleibt. Da die rc.local wie du schon sagtest weit aus früher durchgeführt wird, ist das auch keine Lösung für den "Betrieb" :) Aktuell benutze ich auch einen LXC mit 2 IP Virtuellen Interfaces.. (Ipv4) Ist mir sehr...
  7. B

    [SOLVED] LXC 2. eth Schnittstelle nimmt keine ipv4

    Die verschwinden? Die Einträge aus der Interfaces nicht einfach so. Aber nochmal um das Problem aufzugreifen bzw. meine Frage von oben: Wenn du das machst, funktioniert dann wenigstens eine Internetverbindung? Du kannst einen ziemlich trivialen Weg "vornehmen": Du könntest in der rc.local die...
  8. B

    [SOLVED] LXC 2. eth Schnittstelle nimmt keine ipv4

    Trag mal bitte in die Interfaces vom dem LXC Container manuell den Eintrag ein mit folgenden Daten: Der erste bleibt so müsste ja dann ca. auto eth0 iface eth0 inet static deineip netmask lauten. Trag darunter mal manuell: auto eth0:1 iface eth0:1 deinezweiteip netmask ein...
  9. B

    Cluster - SSL3 - certificate verfiy failed

    Sofern das nur Spikes sind ist das ja okay aber wenn das durchgehend so hoch ist, kann sich das ja schon auf die VMS auswirken eigentlich. Hab den Fehler gefunden. Es wurde aus irgendeinem Grund permanent eine LOG beschrieben. Als ich mir mal die größten Files angezeigt habe im var Verzeichnis...
  10. B

    Cluster - SSL3 - certificate verfiy failed

    Ja 3 LXC Maschinen & eine QM bzw. KVM Maschine. Die I/O Waits sind zwischen 0.6 bis 2.1 manchmal gibt es Spikes manchmal auch bei 0.1-0 Spikes gehen hoch bis zu 15 Ich hab wohl die Vermutung, dass es am SoftwareRAID liegt irgendwie. So stark waren die vorher auch noch nicht. Soweit ich das...
  11. B

    Cluster - SSL3 - certificate verfiy failed

    Hello Community, I have some problems with a (hopefully) running separate cluster. Short Version of the Problem: I can see via the GUI of each Node the other Node but it's not "green" Here a Screenshot: If I'll try to do something with a Node which isnt the local, there appears a Window...
  12. B

    Cluster - SSL3 - certificate verfiy failed

    Trotzdem danke! Wenn du doch noch irgendeine Idee hast, wäre ich für jedes Geistesblitz zu haben. Eine Frage noch. Kann ein nicht Vollständiges Cluster IO Waits verursachen? Aus irgendeinem Grund, habe ich extrem hohe IO Waits. Festplatte ist okay. Denke mal, dass der da wohl ganze Zeit was...
  13. B

    Cluster - SSL3 - certificate verfiy failed

    Hey, das mit Multicast hab ich auch schon irgendwo gelesen. Nur sind die Proxmox Systeme bei OVH. Ein Kollege hat sich dort einen Proxmox Server gekauft & dann wollten wir ein Cluster Bilden. Dazu haben wir die Seite benutzt : https://pve.proxmox.com/wiki/Separate_Cluster_Network Also müsste...
  14. B

    Cluster - SSL3 - certificate verfiy failed

    Hallo! Danke für deine Antwort. Nein benutze nur default Sachen. Habe auch mal zum testen alle Zertifikate aus entfernt : https://pve.proxmox.com/wiki/HTTPS_Certificate_Configuration_(Version_4.x_and_newer) und dann mal mit pvecm updatecerts die Zertifikate auf den Nodes aktualisiert...
  15. B

    Cluster - SSL3 - certificate verfiy failed

    Hallo liebe Community! Ich habe heute versucht ein Cluster aufzusetzen (Sparate Network Cluster) und stehe grade vor einer kleinen (hoffentlich) Hürde. Kurz vorab: Ich sehe auf beiden Server die Nodes aber auf jedem Node ist nur der eigene Online. BeispieL. Node 1 : one Node 2 : two Auf Node...

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!