bbgeek17's latest activity
-
bbgeek17 replied to the thread canot migrate vm fro a version 8 cluster node to a version 9 node.Hi @muekno, It would help if you can share: pveversion -v qm list qm status qm migrate ID NODE2 Screenshot of the exact state you are looking at. Cheers Blockbridge : Ultra low latency all-NVME shared storage for Proxmox -... -
bbgeek17 replied to the thread Can't access my proxmox server URL (SOLVED).Great to hear! Don't forget to mark this SOLVED by editing the first message and selecting the appropriate subject prefix. Cheers Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
bbgeek17 reacted to argjerryl's post in the thread Can't access my proxmox server URL (SOLVED) with
Like.
Hi everyone, sorry for the last response just was tired after an overnight shift I had. Thanks @Impact for the github documentation for this problem. And thank you @bbgeek17 and @leesteken for the help! I was able to reconfigure my IP for my PVE... -
bbgeek17 replied to the thread Update 3 Node PVE Cluster.Hi @muekno , No - there is no requirement to have Ceph with PVE9. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
bbgeek17 replied to the thread Backing-up Host OS Settings for quick Recovery.There is nothing PVE host specific in PBS. Here is one of many discussions on this topic: https://forum.proxmox.com/threads/official-way-to-backup-proxmox-ve-itself.126469/ Blockbridge : Ultra low latency all-NVME shared storage for Proxmox -...
-
bbgeek17 replied to the thread Can't access my proxmox server URL (SOLVED).As @leesteken mentioned, your existing subnet is different from the one you used on the PVE. You need to re-IP your PVE to place it in 192.168.1.0/24. Pay particular attention to your existing DHCP ranges to avoid further conflicts Blockbridge...
-
bbgeek17 replied to the thread Can't access my proxmox server URL (SOLVED).Hi @argjerryl , welcome to the forum. What exact URL are you trying to access and what is the exact error you are receiving? Could you answer these questions please: What is the IP of your workstation? Can you ping the PVE server? Can you ssh...
-
bbgeek17 reacted to alexskysilk's post in the thread Proxmox stuck after upgrade from 8.4.19 to 9.x with Like.
I've run into this issue multiple times in the past. IF you have linux kernel 6.1 in your available kernels to boot, you can live with it and just pin that kernel. Going forward, you should consider upgrading your motherboard to something from...
-
bbgeek17 replied to the thread Possible regression in PVE 9.2.3: owner = VM when migrating ISO attached as media=disk.I would say there is definitely a problem in the logic here. The ISO cannot be "owned" by the VM, its a shared object. The reason its "VM" is due to failing to determine the owner's ID and the ID value not being set. Historically you would get...
-
bbgeek17 replied to the thread Proxmox stuck after upgrade from 8.4.19 to 9.x.I'd recommend trying booting into an older Kernel. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
bbgeek17 replied to the thread Slow backups sabotaging VMs.I would think the steps are the same as troubleshooting any generic slow application whose job is to transfer data: - record/analyze CPU load on both side - record/analyze disk load - record/analyze network load, errors You may want to install...
-
bbgeek17 reacted to pve-root's post in the thread Proxmox stuck after upgrade from 8.4.19 to 9.x with Like.
Thank you, I could set a new pw
-
bbgeek17 replied to the thread RHEL 7 VM MIGRATION FROM IBM POWER TO PVE 8.3.I don't think there is one for this conversion. I believe this is your only path. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
bbgeek17 replied to the thread Proxmox stuck after upgrade from 8.4.19 to 9.x.You can try this wiki to either change the password or debug the logs on you system: https://pve.proxmox.com/wiki/Root_Password_Reset Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
bbgeek17 replied to the thread Mutil-NIC Proxmox w/ TrueNAS iSCSI.Hi @NateNate , You have not shared your exact configuration of either the networking or the PVE storage subsystem. If my understanding of your description is correct, you are specifying an IP address in storage.cfg: - if you use the mgmt, the...
-
Thank you all. Coming from VMware and running mission critical workloads, we would definitely require some form of 24x7 support. If we end up going this route, I'll go with that suggestion and get customer references.
-
bbgeek17 replied to the thread PVE in Enterprise Environments.It is a bit of a catch-22 situation. PVE is elegantly straightforward to manage, and firms with strong Linux administration skills often find they do not require partner involvement. At the same time, forum members tend to be more technically...
-
bbgeek17 replied to the thread PVE in Enterprise Environments.Hi @esnmb , as an enterprise storage vendor we see all ranges of business customers moving to PVE. How they solve the support needs differs from self-supporting to partner engagement, to relying on Proxmox support. We have yet to hear about a...
-
bbgeek17 replied to the thread ESXi import fails at a reproducible offset with "qemu-img: error while reading ... Input/output error"."ddrescue" is great but OP's file is in ESXi on VMFS. "dd" is available in ESXi, "ddrescue" is not. "conv=noerror" option should be sufficient. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox -...
-
bbgeek17 replied to the thread lost disk in datacentre pane.Hey @warner_k , you can mark the thread as SOLVED by editing the first message and selecting the appropriate subject prefix. Cheers Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox