bbgeek17's latest activity
-
bbgeek17 replied to the thread [SOLVED] How to create a virtual machine on a ZFS storage device from the command line?.If you want to create new volume as part of VM creation, you specified the syntax wrong, from "man qm": Use the special syntax STORAGE_ID:SIZE_IN_GiB to allocate a new volume. It should be: data:vm-2114-disk-0:10 The command only accepts... -
bbgeek17 replied to the thread iSCSI Huawei Oceanstore Dorado 3000 LVM and Multipath.We've released a KB article since this thread went dormant : https://kb.blockbridge.com/technote/proxmox-lvm-shared-storage/ You may find it helpful Blockbridge : Ultra low latency all-NVME shared storage for Proxmox -...
-
bbgeek17 reacted to t.lamprecht's post in the thread Call for Evidence: Share your Proxmox experience on European Open Digital Ecosystems initiative (deadline: 3 February 2026) with
Like.
Dear Proxmox-Community, we are asking for your support. The European Commission has opened a Call for Evidence on the initiative European Open Digital Ecosystems, an initiative that will support EU ambitions to secure technological sovereignty... -
bbgeek17 reacted to Impact's post in the thread [SOLVED] Cant install numactl - Proxmox 9.1 with Like.
@mouse51180 You appear to have no debian repos (where this package is provided from) set up. Please read this. @bbgeek17 You have a stray cat on the second command. I'd use tail -n+1 /etc/apt/sources.list* to get all the files including their names.
-
bbgeek17 replied to the thread [SOLVED] Cant install numactl - Proxmox 9.1.Hi @mouse51180 , welcome to the forum. You are mixing Debian (PVE userland) and Ubuntu (universe repo). What happens when you run "apt update" now? What is in your: cat /etc/apt/sources.list ls -al /etc/apt/sources.list.d/ cat...
-
bbgeek17 replied to the thread cron job not executed.It happens :-) You can mark the thread as solved, if you like, by editing the first post and choosing the appropriate subject prefix. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
bbgeek17 replied to the thread cron job not executed.You misspelled the "shutdown" in cron. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
bbgeek17 replied to the thread Call for Evidence: Share your Proxmox experience on European Open Digital Ecosystems initiative (deadline: 3 February 2026).Considering that virtualization is one of the most critical components of modern cloud infrastructure, it’s hard to think of a more deserving European company in this space than Proxmox Server Solutions GmbH. Blockbridge : Ultra low latency...
-
bbgeek17 replied to the thread [SOLVED] PVE 9.1.4 Debian 13 Cloud Init not working.Hi @tim.baumgartl , welcome to the forum. Give "generic" image a try. From Debian website: https://cdimage.debian.org/cdimage/cloud/ nocloud: Does not run cloud-init and boots directly to a root prompt. Useful for local VM instantiation with...
-
bbgeek17 replied to the thread network card not visible, driver or hardware error?.Network cards are driven by chipsets - the “brains” of the NIC. Most of these chipsets are designed and manufactured by a small number of companies and then licensed or sold to vendors who do not fabricate their own silicon. Mellanox and NVIDIA...
-
bbgeek17 replied to the thread Transition from VMWare to Proxmox on same machine.Hi @TardisITguy , welcome to the forum. You may have missed the "import wizard" feature that was released a while ago: https://www.proxmox.com/en/services/training-courses/videos/proxmox-virtual-environment/proxmox-ve-import-wizard-for-vmware...
-
bbgeek17 replied to the thread Fiber Channel SAN and Multipath after a reboot.Hi @lowtekk , welcome to the forum. I am not experiencing the same issue as you. The links appear to be functional. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
bbgeek17 replied to the thread Cannot log in via GUI, ssh does not respond.It occurred to me that your issues could also be, theoretically, caused by MTU mismatch or even IP conflicts, not-withstanding the console behavior. The console could be just a bad monitor? Blockbridge : Ultra low latency all-NVME shared...
-
bbgeek17 replied to the thread Cannot log in via GUI, ssh does not respond.Proxmox Virtualization Environment is, indeed, a collection of custom packages. However, it runs on Debian Linux with an Ubuntu-derived kernel. Those two components, primarily the kernel, are what directly interact with your hardware. SSH is a...
-
bbgeek17 replied to the thread Cannot log in via GUI, ssh does not respond.Imagine calling an auto shop and telling them that your car sometimes just stops running. You need to turn it off and on to get going, is this something well known? Good luck in your research Blockbridge : Ultra low latency all-NVME shared...
-
bbgeek17 replied to the thread Cannot log in via GUI, ssh does not respond.What you described are generic symptoms that could be caused by many different things. Some examples are: failing disk, full disk, failing memory, etc. If the system is not responsive, the first step is to reboot it. Once it is up, you can...
-
bbgeek17 replied to the thread [SOLVED] iSCSI multipath does not use/recognize all paths..Thank you for the update @Tom123 ! Sounds like the original diagnosis was correct. If you feel comfortable to share the details with the community - please do so. But no worries if you don't. Cheers Blockbridge : Ultra low latency all-NVME...
-
bbgeek17 replied to the thread Double and triple input of characters from the keyboard.Have you tried to restart your ILO console? Use a different ILO method? Make sure you have up to date firmware? In most cases this would be an ILO issue. Make sure you only have one open. Blockbridge : Ultra low latency all-NVME shared storage...
-
bbgeek17 replied to the thread Dedicated Proxmox network interface connectivity issue.@AndyKosh , There is a lot going on here, and none of it is related to PVE. This is purely Linux network management. The output you provided is extremely difficult to read. You must have noticed the ASCII encoding issues in your copy/paste. The...
-
bbgeek17 replied to the thread What are everyone's experience with IBM SANs?.You may be facing a few challenges when dealing with IBM support in conjunction with PVE, as there are several layers where issues can arise: While IBM has performed some interoperability testing with PVE, their storage team may not be as...