bbgeek17's latest activity
-
bbgeek17 replied to the thread [SOLVED] Qemu agent install on PDM.Try: rm -rf /var/lib/apt/lists/* apt clean apt update Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox -
bbgeek17 replied to the thread Open with PVE UI adds wrong port at the end.That is a somewhat critical piece of information for your particular situation. You can create a trusted self-signed certificate for the IP if you wanted. Without looking at the code I suspect that it is hard-coded. You may want to try to...
-
bbgeek17 replied to the thread Open with PVE UI adds wrong port at the end.Hi @ds88284 , welcome to the forum. Ports 8006 and 8007 are the correct ports for Web GUI of PVE and PBS. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
bbgeek17 replied to the thread Web GUI unavailable.I understand that you've already resolved your issue. Just to address this question ^ , you seemed to have had access via SSH. You can do everything via CLI, including VM backup. Cheers Blockbridge : Ultra low latency all-NVME shared storage...
-
bbgeek17 replied to the thread Unable to parse volume ID.@tomachi , while we can try to infer that you are asking for help, technically your post reads as a statement. There is no reference as to what you are trying to do and why. Where is your image located (pwd; ls -al vm-201-disk-0.qcow2) ? Is it...
-
bbgeek17 replied to the thread Web GUI unavailable.Proxmox 8 is based on Debian 12 Bookworm. PVE 9 is based on Debian 13 Trixie. You should not be running PVE8 on Deb13, or PVE9 on Deb12. How you got into this situation we don't know. The cleanest way to resolve this is to backup your VM data...
-
bbgeek17 replied to the thread change network card.It is not recommended to use wireless network with PVE. There are many forum threads about users experiencing issues or offering solutions that worked for them. https://pve.proxmox.com/wiki/WLAN...
-
bbgeek17 replied to the thread [SOLVED] clones? Or Cloud Init?.Yes, Linked clone from a template is thin until you start writing to it. PBS is not aware of the thin nature of the underlying disk. It will do full and incremental backups where appropriate. The doc snippet you quoted explains exactly why...
-
bbgeek17 replied to the thread [Solved] change ethernet RJ-45 to SFP+ fibre on Proxmox server.You should not have two interfaces on the same subnet. It creates more issues than it solves, especially for the beginners. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
bbgeek17 replied to the thread [TUTORIAL] Understanding QCOW2 Risks with QEMU cache=none in Proxmox.Happy New Year! Sorry for the delay on this... we wanted to do a proper analysis. Both cache=direct and cache=writethrough provide substantially stronger consistency guarantees than cache=none. If you are using QCOW/LVM and consistency is a...
-
bbgeek17 replied to the thread [Solved] change ethernet RJ-45 to SFP+ fibre on Proxmox server.Sounds great! You can mark this thread as Solved by editing the first post and changing the prefix dropdown next to the subject. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
bbgeek17 replied to the thread [Solved] change ethernet RJ-45 to SFP+ fibre on Proxmox server.It does not just say "link down", it also says "no carrier". That means that no link/light is detected. However, the second port does not say that. Either move the cable, or change the config to enp100s0f1np1 PS you can continue hiding the MACs...
-
bbgeek17 replied to the thread [Solved] change ethernet RJ-45 to SFP+ fibre on Proxmox server.Hi @Tomm , not without you providing actual output from the system. Since you said you do not have network access to the server, are you manually typing the configuration into the forum? At the very least, we would need: cat...
-
bbgeek17 reacted to odhiambo's post in the thread How to remove VMware Tools after ESXi → Proxmox migration (Windows) with
Like.
Here is how I did it recently. Procedure: Removing VMware Tools After Migrating Windows 11 to Proxmox (Courtesy of chatgpt). This document provides a reliable, field-tested procedure for fully removing VMware Tools from a Windows 11 virtual... -
bbgeek17 replied to the thread How to remove VMware Tools after ESXi → Proxmox migration (Windows).Hi @powersupport , this is a question best answered by the provider of the tools : https://knowledge.broadcom.com/external/article/315629/clean-uninstallation-of-vmware-tools-in.html And if they still have user forum, you will find much more...
-
bbgeek17 replied to the thread Network configuration for NFS shared datastore.It is what it is. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
bbgeek17 replied to the thread Network configuration for NFS shared datastore.Hi @serg2002 , welcome to the forum. Unless you plan to use the underlying interface for VMs, there is no reason to create bridge on top of the bond. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox -...
-
bbgeek17 replied to the thread [SOLVED] PVE9.1 installation - ISCSI boot problem/kernel panic.Hey @kapone, there is no need to apologize, we are not necessarily in disagreement. Given that the installation method discussed in this thread is not officially supported, all suggested approaches are indeed workarounds. That said, this is a...
-
bbgeek17 replied to the thread [SOLVED] External Storage Server for 2 Node Cluster.Great! Happy to help. If you think that your question is resolved, feel free to mark the thread as Solved by editing the first post and selecting Solved from the dropdown next to the Subject. Cheers Blockbridge : Ultra low latency all-NVME...
-
bbgeek17 replied to the thread High latency and catastrophic write performance with iSCSI + shared LVM.Hey @softworx , did you mean to use µ (us) ? 20 ns is less than DRAM :-) Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox