bbgeek17's latest activity
-
bbgeek17 replied to the thread [SOLVED] Adding SMB storage from an internal subnet - not visible.At the very high level, it sounds like you just need to assign 10.x IP to your bond interface. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox -
bbgeek17 replied to the thread [SOLVED] PVE9.1 installation - ISCSI boot problem/kernel panic.There are two things you can try to start with: a) install using vanilla Debian, if it boots - get PVE on. b) start with 8.1 install, pin kernel, upgrade to 9 Good luck Blockbridge : Ultra low latency all-NVME shared storage for Proxmox -...
-
bbgeek17 replied to the thread Proxmox 9.1.1 Snapshots on LVM Thick (classic).@santd , you said you are running LVM THICK. You then correctly pointed out that there is new functionality available for THICK variant of LVM. This was confirmed by @cheiss, and you were advised that you need to edit your storage pool definition...
-
bbgeek17 replied to the thread Recommendation for software-defined storage for Proxmox on OVH (with Veeam snapshot integration).Our offering is designed for Service Providers and Enterprises running on-premises infrastructure. Many SPs directly compete with companies like OVH. Whether it’s feasible to run our software on OVH depends on the availability of suitable...
-
bbgeek17 replied to the thread [SOLVED] Unable to Login to Proxmox - Authentication Fails.If the login is not working and you ruled out things like bad keyboard, wrong language and other HID issues, then I would recommend resetting the password: https://pve.proxmox.com/wiki/Root_Password_Reset When booted into this "rescue" mode you...
-
bbgeek17 replied to the thread Recommendation for software-defined storage for Proxmox on OVH (with Veeam snapshot integration).Veeam's ability to utilize backend storage snapshot functionality to offload the backup workflow is limited to Vsphere. The Veeam PVE plugin integrates with PVE by hooking into primary QEMU process, somewhat similar to how PVE&PBS work (but not...
-
bbgeek17 replied to the thread backup VM no more mail since update to V9.0.You can send test emails via: Datacenter -> Notifications That way you can check whether emails are sent by monitoring the log and/or tcpdump. If you have control over the email server you can also confirm there whether email is being...
-
bbgeek17 replied to the thread [SOLVED] Unable to access web interface.Two things can be causing issues for you at the same time. Happy that you solved it. You can help to keep the forum tidy by marking this thread as SOLVED. To do so - edit the first post and select solved from the drop down menu next to the...
-
bbgeek17 replied to the thread [SOLVED] Unable to access web interface.The IP address you set your PVE: 192.168.2.3 Is not in the same subnet as the rest of your infrastructure: IPv4 is 192.168.1.100 default gateway is 192.168.1.253 Blockbridge : Ultra low latency all-NVME shared storage for Proxmox -...
-
bbgeek17 replied to the thread Proxmox 9.1.1 FC Storage via LVM.I think most people in this forum are aware of LVM being block storage. You'd be surprise with some wild experiments that were attempted/reported here before. There should always be a healthy dose of skepticism about taking posts at face value...
-
bbgeek17 replied to the thread PSA: PVE 9.X iSCSI/iscsiadm upgrade incompatibility.Hi @VictorSTS , You are correct. If there are existing entries in the iSCSI database (iscsiadm -m nodes) at the time of the upgrade, they will cause issues when you try to modify them afterward. Other scenarios can also lead to problems, for...
-
bbgeek17 replied to the thread [PROXMOX CLUSTER] Add NFS resource to Proxmox from a NAS for backup.RPC is done over UDP. Routing UDP over the internet is ... tricky. Either create a VPN-LAN, or find another way. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
bbgeek17 replied to the thread backup VM no more mail since update to V9.0.Check system log (journalctl) , there should be some evidence of mailing program trying to send things. And, there could be an error that will explain the situation. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox -...
-
bbgeek17 replied to the thread iSCSI multipath issue.Its likely a race in boot sequence. Just because the iSCSI is up does not mean that Multipath is settled, nor does it mean LVM is available. We made an article that be useful to you: https://kb.blockbridge.com/technote/proxmox-lvm-shared-storage/...
-
bbgeek17 replied to the thread Proxmox 9.1 und Shared Storage mit iSCSI und LVM-Snapshots.Ich habe mich möglicherweise unklar ausgedrückt bzw. falsch übersetzt. Ich wollte nicht andeuten, dass diese Funktion für etwas anderes als ESXi verfügbar ist. Veeam würde eine ähnliche Möglichkeit für PVE sicherlich begrüßen, aber das ist keine...
-
bbgeek17 replied to the thread Proxmox 9.1 und Shared Storage mit iSCSI und LVM-Snapshots.@Bu66as und @Falk R. liegen im Allgemeinen richtig mit ihrer Beschreibung der PBS-Funktionalität (vorausgesetzt, meine Browserübersetzung ist einigermaßen genau). Es gibt jedoch einige technische Punkte, die eine Klarstellung verdienen...
-
bbgeek17 replied to the thread VDI mit Proxmox und Shared Storage.Linked Clones (vom Template) sind mit iSCSI und/oder NVMe/TCP möglich – vorausgesetzt, Sie haben eine moderne Speicherlösung im Einsatz, die PVE nativ unterstützt. Es gibt einige Einschränkungen bei der neuen Tech-Preview-Snapshot-Funktion...
-
bbgeek17 replied to the thread Erfahrungen mit LVM (thick) + iSCSI Multipath (Pure Storage) und Volume-Chain Snapshots unter Proxmox VE 9.Die Frage nach dem Leistungsvorteil von iSCSI, NVMe/TCP, FC usw. hängt stets von der Implementierung des Herstellers sowie von der Client-Konfiguration ab. Selbst die beste Implementierung des Herstellers nützt wenig, wenn der Client...
-
bbgeek17 replied to the thread [PROXMOX CLUSTER] Add NFS resource to Proxmox from a NAS for backup.There are two operations that are happening in the background when adding NFS storage pool in PVE: - health probe - mount When you are doing manual mount, the health probe is skipped. In PVE case the health probe is a "showmount" command...
-
bbgeek17 replied to the thread No Hard Disk Found.I am confused, if you are upgrading an existing PVE why/where does GUI install come in? If you are doing a new install and running into boot issues, you can give this option a try...