bbgeek17's latest activity
-
bbgeek17 reacted to leesteken's post in the thread [SOLVED] Cant access WebGUI on 8006 but SHH works with
Like.
192.168.50.69/32 should probably be 192.168.50.69/24, since the gateway is within a /24-block. -
bbgeek17 replied to the thread NVMe/tcp volume group discovery.You can try "vgscan --mknodes" Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
bbgeek17 replied to the thread WARNING: PV /dev/md3 in VG vg2 is using an old PV header, modify the VG to update..Hi @wifi75 , This does not seem to be PVE specific and there are a few discussions online about the warning: https://askubuntu.com/questions/1299499/warning-pv-dev-sda3-in-vg-ubuntu-vg-is-using-an-old-pv-header-modify-the-vg-t...
-
bbgeek17 replied to the thread WebUi and SSH not reachable after non-determistic times.Hi @dan.ger , Are you able to SSH/CURL directly from PVE host into itself at the time when the issue manifests? What about between PVE hosts? I.e.: ssh root@localhost ; ssh root@LAN_IP ; ssh root@pve-02; curl -k https://localhost:8006 ; etc The...
-
bbgeek17 replied to the thread Having multiple issues with Proxmox VE.Yes, your physical disk (sda) is failing. It could be a bad cable, a faulty motherboard slot, or even a power issue, but most likely it’s simply a dying disk. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox -...
-
bbgeek17 replied to the thread VM Disk Performance Issue After Moving from Local RAID SSD to NFS Storage.Hi @powersupport , It's been a while since I looked at this thread due to being away. It seems the last deliverables are for you to clarify your setup and retest at all points to establish the baseline. After giving the original post another...
-
bbgeek17 replied to the thread Fresh install network is down.Hi @thewrath009 , welcome to the forum. Your output shows that the interface has no link. Are you sure the cable is plugged in? Into the right port? Is the cable itself working? Have you checked the link light on the NIC? It’s possible you have...
-
bbgeek17 replied to the thread Can we extend the default MAC Prefix in the Cluster.Hi @deepakvidyadharan , welcome to the forum. One way to find the answer to your question is to check the code: root@pve-1:/usr/share/perl5/PVE# grep -R mac|grep prefix ... DataCenterConfig.pm: if ($mac_prefix !~...
-
bbgeek17 replied to the thread [SOLVED] Web GUI is broken since update and or restart.Thank you for sharing your findings. The "community" scripts are indeed number one cause of GUI breakage in 99% of reports. In fact, this ^ was pretty much the guarantee that the scripts were the cause. Blockbridge : Ultra low latency all-NVME...
-
bbgeek17 replied to the thread [SOLVED] Web GUI is broken since update and or restart.You missed "debsums -c" request. What does "pveversion --verbose" show? You can also try to force reinstall all pve* and proxmox* packages in the list above. The starting point is that there are hundreds of thousands of users for whom PVE...
-
bbgeek17 replied to the thread [SOLVED] Migrating disks - to delete source or not?.You are welcome. You can mark the thread solved, to help with forum presentation, by editing your first post and selecting "SOLVED" next to the subject. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox -...
-
bbgeek17 replied to the thread [SOLVED] Migrating disks - to delete source or not?.There are a few reasons to keep the disks: - you don't trust the migration process and want to have that last backup - you want to do a test and then throw away any changes on new storage - you want to re-use the old data in some way None of the...
-
bbgeek17 replied to the thread cloud-init brain dump.Hi @cypherfox , the cloud-init file can be in many different formats: yaml, shell, etc. Merging different styles and formats is complicated and is simply not worth it. As you found, using an external orchestrator like TF to drive VM creation...
-
bbgeek17 replied to the thread Custom user-data via --cicustom not applied on VM boot in Proxmox.The dump command does not consider your custom files. It will only output built-in values, regardless of whether there is an overriding custom setting. The idea might be that you already have access to custom files, but may want to look at what...
-
bbgeek17 replied to the thread cloud-init brain dump.Hi @cypherfox, welcome to the forum! Thanks for sharing your experience, I’m sure it will be useful for others working with cloud-init. My own experience has been a bit different: when using a custom cloud-init file, the internal (GUI)...
-
bbgeek17 replied to the thread [SOLVED] Web GUI is broken since update and or restart.The issue is not the same, but some of the commands and troubleshooting steps are applicable. So you had a pre-existing broken installation and hoped that an upgrade might fix it but it didn't? Have you, by chance, used one of the community...
-
bbgeek17 replied to the thread How to get config of each VM, including disks and location through API.Technically this is a one-liner: for node in $(pvesh get /nodes --output-format=json | jq -r '.[].node'); do for vmid in $(pvesh get /nodes/$node/qemu --output-format=json | jq -r '.[].vmid'); do pvesh get /nodes/$node/qemu/$vmid/config...
-
bbgeek17 replied to the thread PVE 8.x Cluster Setup of shared LVM/LV with MSA2060.I don't know your infrastructure limitations or business requirements to make any recommendations. Generally, it is always best to have more paths than less. Would 4 be better than 2 for you? I don't know. I am not sure I follow. You need to...
-
bbgeek17 replied to the thread NetApp & ProxMox VE.Hi @daus2936 , your question was: The title of the documentation page provided by @alexskysilk is: Set up the multipath.conf file in E-Series - Linux (iSCSI) It is very succinct and states: No changes to /etc/multipath.conf are required. It...
-
bbgeek17 replied to the thread [SOLVED] Can't access the Proxmox Web GUI from LAN.To summarize: you deployed a desktop version of Debian with X interfaces (and likely many other “workstation” tools), then installed PVE, and finally added Docker on the same host. You are able to run curl -k https://192.168.8.2:8006 directly...