alexskysilk's latest activity
-
Aalexskysilk replied to the thread ZFS 2.3.0 has been released, how long until its available?.I mean, zfs is not a cluster aware filesystem. are you using dedicated iscsi bridge heads to serve out zvols to proxmox?
-
Aalexskysilk replied to the thread ZFS 2.3.0 has been released, how long until its available?.@marcellinus thank you for that; its more or less in line with what I expected- but can you share how you're using zfs on drbd?
-
Aalexskysilk replied to the thread ZFS 2.3.0 has been released, how long until its available?.I'd be very curious about your observations about where/when/how much difference this makes. Would you be willing to share what you found? eg, - what class of device/count show benefit, and at what point does it have a detrimental effect? - can...
-
Aalexskysilk replied to the thread [SOLVED] CEPH OSDs Full, Unbalanced PGs, and Rebalancing Issues in Proxmox VE 8.This is the wrong question. Ceph is not really meant to be used for "losing servers." The most common 3/2 replication rule can sustain a host being down safely. it doesnt matter how many nodes you have- SOME placement groups will be on OSDs that...
-
Aalexskysilk replied to the thread zfs 2.3.0.oh good. thank you for volunteering! go ahead and deploy zfs from source and let us know how it goes :)
-
Aalexskysilk replied to the thread zfs 2.3.0.The Proxmox devs are usually pretty good about incorporating the newest openzfs into the stack. It may already be in the test repo; in any case it should be relatively soon. I wouldn't if I were you. this is a version 1.0 release for this...
-
Aalexskysilk replied to the thread Power failure and now GUI doesn't work.whats the output of hostname and the contents of /etc/hosts
-
Aalexskysilk replied to the thread Hosts File replication.hmm. I cn come up with a complicated solution using an overlay but on balance I also use a config management tool to deploy hosts on cluster change ;)
-
Aalexskysilk replied to the thread Hosts File replication.the pve cluster fs can be used for this. just add rm /etc/hosts && ln -s /etc/hosts /etc/pve/hosts to your postinstall script/procedure
-
Aalexskysilk replied to the thread Power failure and now GUI doesn't work.what does systemctl status pvestatd show? also, whats the state of your server (any hung mounts, other errors in journalctl, etc)
-
Aalexskysilk replied to the thread [SOLVED] CEPH OSDs Full, Unbalanced PGs, and Rebalancing Issues in Proxmox VE 8.number of hosts isnt directly related to your size rules. A typical replication group is set to 3:2 where 3 osd's are required for healthy operation and 2 is the minimum osd count required for write access. such a pool would need a minimum of 3...
-
Aalexskysilk replied to the thread High-Level Cluster build help, please.it all depends on your orchestration. you can spin up the replacement, turn off the nic on the source, turn on the nic on the destination. virtually no downtime. I was not aware of the limitation. good to know. This is completely in your hands...
-
Aalexskysilk replied to the thread High-Level Cluster build help, please.You can, in more then one way. simplest is to use vzdump to make a backup and then restore on the destination node. That is the simpler method, but using backup/restore method is safer AND provides you with a current backup. yes. PVE has a tool...
-
Aalexskysilk replied to the thread Help Configuring a Network Adapter on VE Host.understand what @cheiss is telling you. you shouldnt use dhcp for any ACTUAL purpose; if you want to just test an interface using dhcp all you have to do is dhclient [interface]
-
Aalexskysilk replied to the thread How to configure Proxmox to work with 6 drives.yes. a few items of note: 1. you mentioned you want nvme for "power consumption." it may surprise you to learn nvme consume a LOT more power then HDDs. 2. The setup you're describing is for a production dataset and a backup. if you're already...
-
Aalexskysilk replied to the thread Adding a New Server to Existing Proxmox Cluster - Network Configuration and VM Communication.in that case: possible but likely not necessary. Your initial problem report is that you're running out of capacity- not that you want to increase fault tolerance. if thats not a requirement there's no reason to add the complexity- just add a...
-
Aalexskysilk replied to the thread High-Level Cluster build help, please.yes. You can wipe the disks are reformat them with zfs, sure. you've described the process pretty clearly. As long as what you end up with is workable for you, the only thing I would add is to make sure you have a good backup before proceeding.
-
Aalexskysilk replied to the thread Why is Nmap Installed by Default in Proxmox?.a paid or scissors can be used to kill. it doesnt mean you get rid of all your scissors. yes, nmap can be run to leak data, but that doesnt mean that the LEAKED DATA is of any harm or consequence to you. This falls into the more "theoretical"...
-
Aalexskysilk replied to the thread Mediated iGPU.I dont know. reading the logs before observing an issue is counterproductive; are you having any problems?
-
Aalexskysilk reacted to BobhWasatch's post in the thread Why is Nmap Installed by Default in Proxmox? with
Like.
If he removes it he will find out what if anything depends on it. Apt will tell him :)