Recent content by Adnan

Of course, I know HA shouldn't be used in this case, and as said, it's more about having everything on 1 screen that I'm interested in. I'm having big hopes that our PtP wireless link will give me a better experience with this setup. I've seen some posts about a central management for Proxmox...

I understand it's possible, but I can't see how. Loosing the PtP link is possible as it's currently done via internet, but the routes on our gateway are so: 10.133.0.0/16 via 10.0.0.2 (on PVE1's side) and 10.190.0.0/16 via 10.0.0.1 (on PVE4's side). 10.0.0.0/30 on both sides are on the EoIP...

Correct (it seem so). They're both the same

New hiccup, I did : journalctl -u corosync --since "05:00:00" > corosync_pveX.log, nothing much is shown until the loss of link between them.

Sorry I didn’t know if you wanted to see what happens immediately. I’m still waiting for a hiccup, but as the logs show « strange » things to me, and as it takes 9 days to hiccup, better send something now. Anyway, I’ll wait for the next issue to post the logs again

o_O Here you are

Set the MTU of which device? PVEs, 1, 4, all? Switch connected to them or the router to internet ? All the PVEs are connected to a switch (not sure if it's manageable) then to a mikrotik router on which the ISP router is connected. Our mikrotik handles an EoIP tunnel between the 2 networks. if...

Sorry for the delay guys, I was waiting for the cluster to fail again. Which happened today. I did that on PV1 and PVE4 at the same time (stop 1, stop 4, start 1, start 4) and promox web GUI was empty (datacenter with no node) for 2 or 3 minutes. But PVE4 still disconnected. I meant the issue...

Hi, I have 4 servers across 2 physical sites, named PVE1, PVE2, PVE3 (on site 1) and PVE4 (on site 2). Sites 1 and 2 are physically across the street, currently connected together via VPN over WAN and we are installing a radio PtP link between the sites. Anyway, the issue is something else...

Oops The exact message is: create storage failed: storage 'backups' is not online (500) when I add a share. I've made some tests, on Synology we have an LDAP server and the account is xxx@domain.ext, it allows the shares to be queried but it doesn't allow adding the share. I removed the...

Hi Fiona, I ran into the same problem, and I'm up to date. The 3 servers highlighted are the same but different shares. When I add them, the shares are seen (so the credentials are correct) and I still get the 500 error. If I add disabled and enable it afterward, even after a reboot they won't...

I should have better explained. My provider’s UI allows me to choose the number of disk I want to install Proxmox on, XFS or Ext4 and the RAID. previously, I installed Proxmox on Ext4, no RAID and on 1 disk. Then using Proxmox UI I created a zfs pool with the 3 other disks. This was fine and...

Hi, so I was doing this since march. Installed on ext4. Then I saw I was able to access IPMI KVM and installed a server with Proxmox ISO on ZFS filesystem. Well now I can use any img format (even QCOW2) and it seems it's using the container's snapshot capability instead of ZFS' but I may be...

It was a test server, I wanted to try to regenerate the keys, but it ended up expiring because I ordered a more powerful machine. Thank you for your help !

Well. If it fails, I'll just have to clone it again, won't I ? ಠ‿ಠ