aaron's latest activity
-
aaron replied to the thread 3rd Ceph MON on external QDevice (Podman) - 4-node / 2-site cluster.maybe, never tried it. it is definitely more complex and chances are that things go out of sync in the ceph config if you are not careful. or versions might differ a bit between the ceph mons. if things go wrong and you run a unique setup like... -
aaron replied to the thread VM RAM Nutzungsanzeige.Wie ich schon versucht habe zu erklären, ist der große Unterschied von PVE 8 → 9, dass die Host Sicht des RAM Verbrauchs jetzt deutlich richtiger berechnet wird. Unter PVE 8 war der Wert mitunter deutlich zu niedrig. Das Balloon Device zu...
-
aaron replied to the thread Guidance Needed to Improve Sync Performance on 10 Mbps Link.Okay. For the initial sync, you could have either used a "Removable Datastore", sync to it, move it to the remote location, add it there as well and then sync from it to the local remote datastore...
-
aaron replied to the thread Guidance Needed to Improve Sync Performance on 10 Mbps Link.Is it about the first initial sync or about later syncs?
-
aaron replied to the thread [SOLVED] Wie kann es sein, dass.TIL about gdu. Deutlich flotter als ncdu. :) @TErxleben je nachdem wie alt der Host ist und was da abseits von PVE irgendwann mal drauf installiert wurde, kann auch ein apt autoremove und apt purge manchmal ganz gut tun. Auch alte Kernel...
-
aaron reacted to robm's post in the thread VM live migration issue - api error (status = 400: api error (status = 596: )) with
Like.
Thanks for the tip. We added the IPs of the clusters to the firewall, and it worked! Just had to map the server names to the private network in /etc/hosts to force the migration over the PVN, and use detailed mapping, and everything went as... -
aaron replied to the thread VM live migration issue - api error (status = 400: api error (status = 596: )).Can the clusters talk directly to each other?
-
aaron replied to the thread I have trouble with VM.can you please post the full config of the VM? You get it by running qm config 100 on the CLI What is the hardware of the host? Mainly, which CPU is used? What is the output if you run lscpu on the CLI? Please paste the output within CODE tags...
-
aaron replied to the thread I have trouble with VM.In the Hardware menu of the VM.
-
aaron replied to the thread I have trouble with VM.Did you add an EFI disk with Pre-Enrolled keys? Then Secure Boot is enabled and not every Linux Distro can boot with that. Remove the EFI disk and add a new one with the "Pre-Enrolled keys" checkbox disabled and try again :)
-
aaron replied to the thread VM RAM Nutzungsanzeige.Ist bei Windows der "Balloon Service" von der VirtIO ISO installiert und gestartet? Unter Linux liefert der Linux Kernel direkt die Infos über das Balloon Device. Das gilt auch für pre PVE 9 ;-)
-
aaron replied to the thread VM RAM Nutzungsanzeige.Das war schon immer so. Auch pre PVE 9 war das Balloon Device nötig, um eine akkurate Gast-Sicht in der VM Summary auf den RAM Verbrauch zu bekommen. Die Host-Sicht auf den Gast RAM war nicht ganz richtig und hat einige Teile des Overheads nicht...
-
aaron replied to the thread VM RAM Nutzungsanzeige.Siehe hier: https://pve.proxmox.com/wiki/Upgrade_from_8_to_9#VM_Memory_Consumption_Shown_is_Higher Wenn der Gast die richtigen Infos via Ballooning Device liefert, stimmt die Anzeige auch wieder. Solange Memory und Minimum Memory gleich sind...
-
aaron replied to the thread New Import Wizard Available for Migrating VMware ESXi Based Virtual Machines.No, the VM to be imported needs to be on a storage where the virtual disks will be stored as files (vmdk).
-
aaron replied to the thread ARM64 Guest on PVE9 Node possible?.Yes, I am quite sure: $ apt-cache policy pve-edk2-firmware-aarch64 pve-edk2-firmware-aarch64: Installed: 4.2025.05-2 Candidate: 4.2025.05-2 Version table: *** 4.2025.05-2 500 500 https://enterprise.proxmox.com/debian/pve...
-
# apt install pve-edk2-firmware-aarch64 Installing: pve-edk2-firmware-aarch64 Summary: Upgrading: 0, Installing: 1, Removing: 0, Not Upgrading: 0 Download size: 2.690 kB Space needed: 272 MB / 7.848 MB available...
-
aaron replied to the thread Install proxmox PBS in a VM vmware.Technically, this surely is possible. How will it perform once it contains quite some data and is under load? No idea. It might be fine for your workload. It might be bad… You'll have to see how it goes.
-
aaron replied to the thread ARM64 Guest on PVE9 Node possible?.The pve-edk2-firmware-aarch64 package should be available in all repositories, test, no-subscription and enterprise from what I can see. The latest version in the enterprise repo is pve-edk2-firmware-aarch64_4.2025.05-2_all.deb
-
aaron replied to the thread How does the licensing work?.First of, small but important difference: the primary license of Proxmox products is the AGPLv3. You are buying subscriptions :) The Subscription for Proxmox VE needs to match the number of physical CPUs in the server. That's why you have a few...
-
aaron reacted to fba's post in the thread Is there an easier way to enable remote ssh root login in the installer ? with Like.
Hi, have you considered using the auto-install-assistent and provide an answer file with the configuration details, already? https://pve.proxmox.com/wiki/Automated_Installation