aaron's latest activity
-
aaron reacted to joshiyamamoto's post in the thread Please help finding correct API Endpoint with
Like.
this helped me alot I used now this endpoints in combination with per node api calls and it works! -
aaron replied to the thread P2V Windows XP mit RS-232 und direkter Grafikausgabe + Steuerung.Das ist bei alten Industrieanlagen, die viele hunderttausende bis millionen €kosten,n mitunter nicht so einfach ;) Neben dem Hinweis von @Falk R. bez. Treibern, die virtuelle HW so alt wie möglich für den Anfang: Machine type: i440 Disk als...
-
aaron replied to the thread Proxmox-VE Boot issue.Ich vermute, mit den bisschen infos die ich habe, dass da noch ein Check des LVMs oder Dateisystem am laufen war. Der letzte kleinere Screenshot sieht zumindest sehr danach aus.
-
aaron replied to the thread RAM Display Bug on PVE 9.0.3 ?.This is regarding the VM summary panel on Proxmox VE. In your screenshots you have "Memory Usage" with the line chart and one line below that is the "Host memory usage". Those values are the same in both screenshots → Proxmox VE did not get any...
-
aaron replied to the thread Error: Failed to fetch https://enterprise.proxmox.com/debian/ceph-squid/dists/trixie/InRelease 401 Unauthorized.Sieh okay aus. Wenn du kein Ceph verwendest, ob jetzt als HCI Server oder um den Host zu einem externen Ceph Cluster zu verbinden, brauchst du die Ceph Repositories auch nicht unbedingt. Ansonsten einfach noch das letzte Ceph no-subscription Repo...
-
aaron replied to the thread Problem with VLANs.hmm, yeah, VLAN 1 is the default "no vlan configured" one. If you only have the vmbr0 and assign the VLAN tag in the VMs virtual NIC, any packet leaving the node should be tagged accordingly. Maybe run some tcpdump on vmbr0, or the underlying...
-
aaron replied to the thread Please help finding correct API Endpoint.Ah okay. I understood that they want to see which VMs used to be on that node. In that case, I think checking task logs or syslogs for recovery tasks would work somewhat. Or you fetch the cluster/resources every minute or two, and can then diff...
-
aaron replied to the thread Problem with VLANs.What do you want to achieve? Some VMs that should be placed in VLAN 3? The host should not be placed in any VLAN? Then, on the port that you connect your PVE host to the switch, 3 should be a tagged VLAN. If your switch supports it, configure an...
-
aaron replied to the thread Please help finding correct API Endpoint.Also https://pve.proxmox.com/pve-docs/api-viewer/#/cluster/resources would be always a first check to see where resources are at the moment. One API call that the web UI is using all the time. It should also report back guests on a failed node...
-
aaron replied to the thread Replication failure.The pools need to be called the same. So if the pool on the second node is empty, you could rename it: zpool export {pool} zpool import {pool} {new name of pool, same as on other node} Or destroy and recreate it under the same name. If there is...
-
aaron replied to the thread Error: Failed to fetch https://enterprise.proxmox.com/debian/ceph-squid/dists/trixie/InRelease 401 Unauthorized.Die Default Enterprise repos gibts nur gegen eine Subscription. Du kannst diese Disablen und stattdessen über Add die jeweils passenden no-subscription Repos hinzufügen. Siehe...
-
Indeed, I enabled the ballooning option, specifying the same value for both the minimum and maximum memory, and the information about memory usage is correct in the VM summary. Thanks for the info.
-
aaron replied to the thread DNSBL limit, how to resolve?.The Proxmox Mail Gateway wiki page has a Getting Started page that also explains how you can set up unbound directly on it as a dedicated resolver: https://pmg.proxmox.com/wiki/index.php/Getting_started_with_Proxmox_Mail_Gateway
-
aaron replied to the thread Proxmox Virtual Environment 9.0 released!.Did you run apt update after changing all the sources? Because then it should usually find a few hundred packages to update. It might need to run again. But yeah, in that case it should be fine. In the upgrade guide we don't call pve8to9 anymore...
-
aaron replied to the thread Proxmox Virtual Environment 9.0 released!.Do you have the "ballooning device" enabled in the advanced memory options? if not, then there is no way to get the detailed guest view infos and you are in the same boat as with the *BSDs ;) See the above or...
-
aaron replied to the thread How do I keep the subscription server ID the same after reinstalling PVE on a machine?.I don't know exactly what the situation currently is and what could be possible or not. But can you please bring that up either in our shop or via office@proxmox.com? Those would be the best channels to discuss this :)
-
Yep, already a known thing. The Datacenter this server is in requires it. Something with environment / energy saving. Unless you have good reason to run Performance mode and can prove it, you can set. They do checks. So server will be moved...
-
aaron replied to the thread 100% Memory Spikes on Guest.Ah okay, well then reverse my recommendation ;-). It is just important that Windows has seen a drive actually using the VirtIO SCSI driver before you can switch the boot drive over. Otherwise you will run into the inaccessible boot device blue...
-
aaron replied to the thread 100% Memory Spikes on Guest.One last step is usually to switch the Windows installation over to VirtIO drivers instead of SATA. As mentioned in the Post migration steps here: https://pve.proxmox.com/wiki/Migrate_to_Proxmox_VE For Windows to boot from a VirtIO SCSI disk, a...
-
aaron replied to the thread 100% Memory Spikes on Guest.Can you post the config of the VM? Run the following command on the host: qm config 110 and post the output within blocks (or use the formatting buttons of the editor. Regarding "memory usage spikes" in the VMs summary panel: If the "Ballooning...