aaron's latest activity
-
aaron replied to the thread Please help finding correct API Endpoint.Also https://pve.proxmox.com/pve-docs/api-viewer/#/cluster/resources would be always a first check to see where resources are at the moment. One API call that the web UI is using all the time. It should also report back guests on a failed node... -
aaron replied to the thread Replication failure.The pools need to be called the same. So if the pool on the second node is empty, you could rename it: zpool export {pool} zpool import {pool} {new name of pool, same as on other node} Or destroy and recreate it under the same name. If there is...
-
aaron replied to the thread Error: Failed to fetch https://enterprise.proxmox.com/debian/ceph-squid/dists/trixie/InRelease 401 Unauthorized.Die Default Enterprise repos gibts nur gegen eine Subscription. Du kannst diese Disablen und stattdessen über Add die jeweils passenden no-subscription Repos hinzufügen. Siehe...
-
Indeed, I enabled the ballooning option, specifying the same value for both the minimum and maximum memory, and the information about memory usage is correct in the VM summary. Thanks for the info.
-
aaron replied to the thread DNSBL limit, how to resolve?.The Proxmox Mail Gateway wiki page has a Getting Started page that also explains how you can set up unbound directly on it as a dedicated resolver: https://pmg.proxmox.com/wiki/index.php/Getting_started_with_Proxmox_Mail_Gateway
-
aaron replied to the thread Proxmox Virtual Environment 9.0 released!.Did you run apt update after changing all the sources? Because then it should usually find a few hundred packages to update. It might need to run again. But yeah, in that case it should be fine. In the upgrade guide we don't call pve8to9 anymore...
-
aaron replied to the thread Proxmox Virtual Environment 9.0 released!.Do you have the "ballooning device" enabled in the advanced memory options? if not, then there is no way to get the detailed guest view infos and you are in the same boat as with the *BSDs ;) See the above or...
-
aaron replied to the thread How do I keep the subscription server ID the same after reinstalling PVE on a machine?.I don't know exactly what the situation currently is and what could be possible or not. But can you please bring that up either in our shop or via office@proxmox.com? Those would be the best channels to discuss this :)
-
Yep, already a known thing. The Datacenter this server is in requires it. Something with environment / energy saving. Unless you have good reason to run Performance mode and can prove it, you can set. They do checks. So server will be moved...
-
aaron replied to the thread 100% Memory Spikes on Guest.Ah okay, well then reverse my recommendation ;-). It is just important that Windows has seen a drive actually using the VirtIO SCSI driver before you can switch the boot drive over. Otherwise you will run into the inaccessible boot device blue...
-
aaron replied to the thread 100% Memory Spikes on Guest.One last step is usually to switch the Windows installation over to VirtIO drivers instead of SATA. As mentioned in the Post migration steps here: https://pve.proxmox.com/wiki/Migrate_to_Proxmox_VE For Windows to boot from a VirtIO SCSI disk, a...
-
aaron replied to the thread 100% Memory Spikes on Guest.Can you post the config of the VM? Run the following command on the host: qm config 110 and post the output within blocks (or use the formatting buttons of the editor. Regarding "memory usage spikes" in the VMs summary panel: If the "Ballooning...
-
aaron replied to the thread Proxmox Virtual Environment 9.0 released!.@tithitoy @down16 This is not a problem, but due to the BSDs not reporting back any details regarding their internal memory usage. Therefore, we can only fall back to the host memory view, which has now changed a bit as we account for the...
-
aaron reacted to fabian's post in the thread pve upgrade to version 9 , logs show crit: RRD update error: unknown/wrong key with
Like.
did you upgrade all nodes to the last 8.4 package versions before updating the first node to 9.0? -
aaron replied to the thread Proxmox Virtual Environment 9.0 released!.@juliokele to follow up here, yes there were some changes in how we gather and calculate the "host view" of the guests memory usage. See this commit which introduced the change...
-
aaron replied to the thread Proxmox-VE Boot issue.hmm, und damit ich das richtig verstehe, die Gäste starten und sind grundsätzlich erreichbar? Falls ja, wie ist das Netz konfiguriert? Also gehen die über die default vmbr0 raus oder gibts da eine eigene? Hat der Host selbst nur ein IP? Der...
-
aaron replied to the thread Proxmox-VE Boot issue.Kommst du am Host in ein anderes TTY? (CTRL+ALT+Fx) also F1 bis F12? Und taucht dort evtl. eine login Maske auf?
-
aaron replied to the thread Proxmox Virtual Environment 9.0 released!.The longer the selected time span, the more visible the difference is. Don't you have more spikes in the CPU graph with MAX? The new pressure stall graph data is only collected with PVE9. Prior to that, there won't be anything to graph. Also...
-
aaron reacted to sollarfun20's post in the thread [SOLVED] Proxmox VE - "Unable to locate package corosync-qdevice" with Like.
I have resolved the issue, the DNS servers were misconfigured on my nodes. Marked as resolved.
-
aaron replied to the thread Is this an enterprise SSD?.I can recommend the following website to quickly check and filter stuff based on properties. English (UK): https://skinflint.co.uk/ German (AT,DE,CH): https://geizhals.at So for this particular SSD...