Recent content by 300cpilot

Just curious if there is a place we can post scripts/software we have created for our proxmox environments? I understand Proxmox probably would not want to do this, just curious if something exists out there, from Proxmox. I have used several githubs and sites over the years, looking for an...

I thought I would let everyone know that I have replaced my server and the drives. The original server had 2tb ssd's in zfs. They were at 20% worn out when I shut it off a month ago. Do to SSD prices, I made the switch to 6 3tb SAS drives, ZFS. Speed hit was real. Boot drive is a raid 1, ssd...

When adding existing VE (8.4.14) I get the (api error (status=400: client connect error) also when adding an existing backup server (3.4.7) I get the same error. The VE is using a LetsEncrypt cert, but I tried a self signed cert as well. The Backup server is using a self signed cert. I did...

The intel ssd730 240gig drive was replace with 88% wear out level. It never failed. I ended up using clonezilla from a thumb drive. Just thought I would try it and it worked. Prior I had used DD to clone with and something did not come across. The 2tb crucials are at 12-13% wear out currently...

Sorry for the delay, been traveling. I have decided to backup the vm's on the backup server. Then replace the drives and reload from scratch. Once it is updated to the same version, I will import the vm's back. Thanks everyone! Side note the boot drive smart data says it has been powered on for...

I am using a https://www.ebay.com/itm/163142320696 Dell H200 Integrated 6Gbps SAS HBA w/ LSI 9210-8i P20 IT Mode ZFS FreeNAS unRAID The guy has quite a business reflashing raid controllers, plus a youtube channel. This was a simple raid card changed to a HBA. Been really happy with it. However I...

see if node 2 can ping node 1 or the internet gateway from the server console. If it can not, then check the nic configs and see if they were reset. Compare the config's between the two. I had mine clear one time before I had a ups.

I think I was not clear, I am looking to see if anyone else noticed anything similar. If they have then its a warning, if not my drives did not last as long as I thought they would, my fault. Three years isn't bad, they were moved from a different server 2 years ago. I thought I was clear in the...

Anyone else seeing this amount of wear on ssd's? I have been running this node for about 2 years, with the drives that are in it. I was watching to see if they would withstand being used this way, because they are desktop drives, so I expected limits, but something has changed. Any way about a...

Can anyone see an issue with turning off the PBS when not in use? I would set the power state in the bios so it will turn on when power is returned. The sever would run a cron job to turn its self off and then the PDU would remove power. The power would be restored 1 hour before it is needed...

I have heard of something similar because of a run state with some cpu's not changing as they should, during a reboot. I can not find it right now, but does the bios have a setting for TDP or power levels? If it does set it to max and try it.

still have found no joy in getting this to work on 24.04. Will be waiting for when it is ready.

Does PBS support a physical Ubuntu 24.04 client backing up to it? Many thanks, the doc's state Debain, but this is an older version. I did read several old posts, but found no joy.

I do not know if this will help and you will likely have to play with it. I had a similar through put issue and I did the following, with some help from this forum. https://forum.proxmox.com/threads/vm-as-firewall-through-put-limits.139673/#post-686293

A followup after the Opnsense 24.1 release. Lets just say it blew things up. Now the settings for the following need to be off. System->Settings->tunables net.inet.tcp.tso = 0 net.inet.udp.checksum = 0 Before I had them on or 1.