So I am moving 6.9 TB of data to my new Proxmox server, on the "from" server it states that it is 6.9 TB, in the CLI on the proxmox server it says the same.
The GUI though says 7.45 TB.
How come?
The GUI though says 7.45 TB.
How come?
Zfs summary usage - wrong?!
- Thread starter Mattias Hedman
- Start date
Most likely inconsistent use of Tib vs TB, perhaps mixing of terms, if it indeed shows "TB" and not "TiB"
https://www.google.com/search?q=6.9+tib+to+tb
Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
https://www.google.com/search?q=6.9+tib+to+tb
Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
And don't forget the overhead. Especially when using a raidz1/2/3 you often get alot of padding overhead. Lets say you write 1TB to a zvol and that zvol will then need 1.66 TB on the pool. That additional 0.66 TB come from the padding overhead when you use raidz1/2/3 without increasing the volblocksize. Snapshot can also consume alot of additional space. And make sure the complete TRIM/discard chain from guest OS to physical Disks is working or your ZFS pool wouldn't be able to free up space after deleting stuff, which will result in a pool that will grow and grow over time.
Read this in case you are using a raidz1/2/3 with zvols (so running VMs ontop of a raidz1/2/3): https://www.delphix.com/blog/delphi...or-how-i-learned-stop-worrying-and-love-raidz
Read this in case you are using a raidz1/2/3 with zvols (so running VMs ontop of a raidz1/2/3): https://www.delphix.com/blog/delphi...or-how-i-learned-stop-worrying-and-love-raidz
Last edited: