Server seemingly crashes when when using a lot of network this is the syslog
And it goes on and on until i go and restart the server manually from the power button.
System Info:
System: Kernel: 6.1.2-1-pve x86_64 bits: 64 compiler: gcc v: 10.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.2-1-pve root=/dev/mapper/pve-root ro quiet intel_iommu=on
iommu=pt pcie_acs_override=downstream,multifunction initcall_blacklist=sysfb_init video=simplefb
ff
video=vesafbff video=efifbff video=vesaff disable_vga=1 vfio_iommu_type1.allow_unsafe_interrupts=1
kvm.ignore_msrs=1
modprobe.blacklist=radeon,nouveau,nvidia,nvidiafb,nvidia-gpu,snd_hda_intel,snd_hda_codec_hdmi,i915
Console: tty 0 Distro: Debian GNU/Linux 11 (bullseye)
Machine: Type: Desktop System: ASUS product: N/A v: N/A serial: N/A
Mobo: ASUSTeK model: PRIME B560M-K v: Rev 1.xx serial: <filter> UEFI: American Megatrends v: 0820
date: 04/27/2021
CPU: Info: 6-Core model: 11th Gen Intel Core i5-11400 socket: LGA1200 bits: 64 type: MT MCP arch: N/A
family: 6 model-id: A7 (167) stepping: 1 microcode: 3C L1 cache: 480 KiB L2 cache: 12 MiB
L3 cache: 11.7 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 62208
Speed: 4281 MHz min/max: 800/4400 MHz base/boost: 2574/4400 volts: 0.8 V ext-clock: 100 MHz
Core speeds (MHz): 1: 4281 2: 4205 3: 4295 4: 4294 5: 4176 6: 4292 7: 4194 8: 4290 9: 2600 10: 2600
11: 4284 12: 4291
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT vulnerable
Type: retbleed mitigation: Enhanced IBRS
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB filling, PBRSB-eIBRS: SW sequence
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: NVIDIA GP106 [GeForce GTX 1060 6GB] driver: vfio-pci v: N/A alternate: nvidiafb,nouveau
bus ID: 01:00.0 chip ID: 10de:1c03 class ID: 0300
Display: server: No display server data found. Headless machine? tty: 120x30
Message: Advanced graphics data unavailable in console for root.
Audio: Device-1: Intel vendor: ASUSTeK driver: N/A alternate: snd_hda_intel, snd_sof_pci_intel_tgl
bus ID: 00:1f.3 chip ID: 8086:43c8 class ID: 0403
Device-2: NVIDIA GP106 High Definition Audio driver: vfio-pci alternate: snd_hda_intel bus ID: 01:00.1
chip ID: 10de:10f1 class ID: 0403
Sound Server: ALSA v: k6.1.2-1-pve
Network: Device-1: Intel Ethernet I219-V vendor: ASUSTeK driver: e1000e v: kernel port: efa0 bus ID: 00:1f.6
chip ID: 8086:15fa class ID: 0200
IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
IF-ID-1: bonding_masters state: N/A speed: N/A duplex: N/A mac: N/A
IF-ID-2: fwbr100i0 state: up speed: 10000 Mbps duplex: unknown mac: <filter>
IF-ID-3: fwbr101i0 state: up speed: 10000 Mbps duplex: unknown mac: <filter>
IF-ID-4: fwbr102i0 state: up speed: 10000 Mbps duplex: unknown mac: <filter>
IF-ID-5: fwln100i0 state: up speed: 10000 Mbps duplex: full mac: <filter>
IF-ID-6: fwln101i0 state: up speed: 10000 Mbps duplex: full mac: <filter>
IF-ID-7: fwln102i0 state: up speed: 10000 Mbps duplex: full mac: <filter>
IF-ID-8: fwpr100p0 state: up speed: 10000 Mbps duplex: full mac: <filter>
IF-ID-9: fwpr101p0 state: up speed: 10000 Mbps duplex: full mac: <filter>
IF-ID-10: fwpr102p0 state: up speed: 10000 Mbps duplex: full mac: <filter>
IF-ID-11: tap100i0 state: unknown speed: 10 Mbps duplex: full mac: <filter>
IF-ID-12: tap101i0 state: unknown speed: 10 Mbps duplex: full mac: <filter>
IF-ID-13: veth102i0 state: up speed: 10000 Mbps duplex: full mac: <filter>
IF-ID-14: vmbr0 state: up speed: 10000 Mbps duplex: unknown mac: <filter>
Drives: Local Storage: total: 9.1 TiB lvm-free: 42.02 GiB used: 20.99 GiB (0.2%)
ID-1: /dev/sda maj-min: 8:0 vendor: Crucial model: CT500MX500SSD1 family: Micron Client SSDs
size: 465.76 GiB block size: physical: 4096 B logical: 512 B sata: 3.3 speed: 6.0 Gb/s rotation: SSD
serial: <filter> rev: 023 temp: 45 C scheme: GPT
SMART: yes state: enabled health: PASSED on: 354d 2h cycles: 2649 written: 117.47 TiB Old-Age:
UDMA CRC errors: 19182 alert: Bad cable/connection?
ID-2: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST4000DM004-2CV104 family: BarraCuda 3.5
size: 3.64 TiB block size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rotation: 5425 rpm
serial: <filter> rev: 0001 temp: 41 C scheme: GPT
SMART: yes state: enabled health: PASSED on: 358d 0h cycles: 86 read: 41.06 TiB written: 11.08 TiB
Pre-Fail: attribute: Spin_Retry_Count value: 100 worst: 100 threshold: 97
ID-3: /dev/sdc maj-min: 8:32 vendor: Toshiba model: DT01ACA100 family: 3.5" DT01ACA... Desktop HDD
size: 931.51 GiB block size: physical: 4096 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rotation: 7200 rpm
serial: <filter> rev: A750 temp: 38 C scheme: GPT
SMART: yes state: enabled health: PASSED on: 3y 30d 16h cycles: 4369
ID-4: /dev/sdd maj-min: 8:48 vendor: Seagate model: ST500LM012 HN-M500MBB
family: Seagate SpinPoint M8 (AF) size: 465.76 GiB block size: physical: 4096 B logical: 512 B sata: 3.0
speed: 3.0 Gb/s rotation: 5400 rpm serial: <filter> rev: 0010 temp: 36 C scheme: GPT
SMART: yes state: enabled health: PASSED on: 2y 12d 16h cycles: 4134
ID-5: /dev/sde maj-min: 8:64 vendor: Toshiba model: HDWD240 size: 3.64 TiB block size: physical: 4096 B
logical: 512 B sata: 3.3 speed: 6.0 Gb/s rotation: 5400 rpm serial: <filter> rev: 0A temp: 35 C
scheme: GPT
SMART: yes state: enabled health: PASSED on: 1y 52d 19h cycles: 327
Partition: ID-1: / raw size: 96 GiB size: 93.93 GiB (97.85%) used: 19.15 GiB (20.4%) fs: ext4 block size: 4096 B
dev: /dev/dm-1 maj-min: 253:1 mapped: pve-root
ID-2: /boot/efi raw size: 512 MiB size: 511 MiB (99.80%) used: 328 KiB (0.1%) fs: vfat block size: 512 B
dev: /dev/sda2 maj-min: 8:2
Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default)
ID-1: swap-1 type: partition size: 8 GiB used: 1.84 GiB (22.9%) priority: -2 dev: /dev/dm-0
maj-min: 253:0 mapped: pve-swap
Sensors: System Temperatures: cpu: 27.8 C mobo: N/A
Fan Speeds (RPM): N/A
Info: Processes: 323 Uptime: 46m wakeups: 0 Memory: 15.47 GiB used: 15.29 GiB (98.9%) Init: systemd v: 247
runlevel: 5 Compilers: gcc: N/A Packages: apt: 886 lib: 498 Shell: Zsh v: 5.8 running in: tty 0 (SSH)
inxi: 3.3.01
Thanks in advance if anyone can help!
Code:
Jun 30 23:47:07 chiren kernel: e1000e 0000:00:1f.6 eno1: Reset adapter unexpectedly
Jun 30 23:47:07 chiren kernel: vmbr0: port 1(eno1) entered disabled state
Jun 30 23:47:08 chiren pvestatd[1414]: command '/sbin/vgscan --ignorelockingfailure --mknodes' failed: exit code 5
Jun 30 23:47:11 chiren kernel: e1000e 0000:00:1f.6 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
Jun 30 23:47:11 chiren kernel: vmbr0: port 1(eno1) entered blocking state
Jun 30 23:47:11 chiren kernel: vmbr0: port 1(eno1) entered forwarding state
Jun 30 23:47:13 chiren kernel: e1000e 0000:00:1f.6 eno1: Detected Hardware Unit Hang:
TDH <0>
TDT <1>
next_to_use <1>
next_to_clean <0>
buffer_info[next_to_clean]:
time_stamp <1025f58b9>
next_to_watch <0>
jiffies <1025f5a28>
next_to_watch.status <0>
MAC Status <40080083>
PHY Status <796d>
PHY 1000BASE-T Status <3c00>
PHY Extended Status <3000>
PCI Status <10>
Jun 30 23:47:15 chiren kernel: e1000e 0000:00:1f.6 eno1: Detected Hardware Unit Hang:
TDH <0>
TDT <1>
next_to_use <1>
next_to_clean <0>
buffer_info[next_to_clean]:
time_stamp <1025f58b9>
next_to_watch <0>
jiffies <1025f5c18>
next_to_watch.status <0>
MAC Status <40080083>
PHY Status <796d>
PHY 1000BASE-T Status <3c00>
PHY Extended Status <3000>
PCI Status <10>
Jun 30 23:47:17 chiren kernel: e1000e 0000:00:1f.6 eno1: Detected Hardware Unit Hang:
TDH <0>
TDT <1>
next_to_use <1>
next_to_clean <0>
buffer_info[next_to_clean]:
time_stamp <1025f58b9>
next_to_watch <0>
jiffies <1025f5e11>
next_to_watch.status <0>
MAC Status <40080083>
PHY Status <796d>
PHY 1000BASE-T Status <3c00>
PHY Extended Status <3000>
PCI Status <10>
Jun 30 23:47:19 chiren pvestatd[1414]: command '/sbin/vgscan --ignorelockingfailure --mknodes' failed: exit code 5
Jun 30 23:47:19 chiren kernel: e1000e 0000:00:1f.6 eno1: Detected Hardware Unit Hang:
TDH <0>
TDT <1>
next_to_use <1>
next_to_clean <0>
buffer_info[next_to_clean]:
time_stamp <1025f58b9>
next_to_watch <0>
jiffies <1025f6000>
next_to_watch.status <0>
MAC Status <40080083>
PHY Status <796d>
PHY 1000BASE-T Status <3c00>
PHY Extended Status <3000>
PCI Status <10>
Jun 30 23:47:21 chiren kernel: e1000e 0000:00:1f.6 eno1: Detected Hardware Unit Hang:
TDH <0>
TDT <1>
next_to_use <1>
next_to_clean <0>
buffer_info[next_to_clean]:
time_stamp <1025f58b9>
next_to_watch <0>
jiffies <1025f61f8>
next_to_watch.status <0>
MAC Status <40080083>
PHY Status <796d>
PHY 1000BASE-T Status <3c00>
PHY Extended Status <3000>
PCI Status <10>
Jun 30 23:47:21 chiren kernel: e1000e 0000:00:1f.6 eno1: Reset adapter unexpectedly
Jun 30 23:47:21 chiren kernel: vmbr0: port 1(eno1) entered disabled state
Jun 30 23:47:25 chiren kernel: e1000e 0000:00:1f.6 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
Jun 30 23:47:25 chiren kernel: vmbr0: port 1(eno1) entered blocking state
Jun 30 23:47:25 chiren kernel: vmbr0: port 1(eno1) entered forwarding state
Jun 30 23:47:27 chiren kernel: e1000e 0000:00:1f.6 eno1: Detected Hardware Unit Hang:
TDH <0>
TDT <1>
next_to_use <1>
next_to_clean <0>
buffer_info[next_to_clean]:
time_stamp <1025f6641>
next_to_watch <0>
jiffies <1025f6801>
next_to_watch.status <0>
MAC Status <40080083>
PHY Status <796d>
PHY 1000BASE-T Status <3c00>
PHY Extended Status <3000>
PCI Status <10>
Jun 30 23:47:28 chiren pvestatd[1414]: command '/sbin/vgscan --ignorelockingfailure --mknodes' failed: exit code 5
Jun 30 23:47:29 chiren kernel: e1000e 0000:00:1f.6 eno1: Detected Hardware Unit Hang:
TDH <0>
TDT <1>
next_to_use <1>
next_to_clean <0>
buffer_info[next_to_clean]:
time_stamp <1025f6641>
next_to_watch <0>
jiffies <1025f69c8>
next_to_watch.status <0>
MAC Status <40080083>
PHY Status <796d>
PHY 1000BASE-T Status <3c00>
PHY Extended Status <3000>
PCI Status <10>
Jun 30 23:47:31 chiren kernel: e1000e 0000:00:1f.6 eno1: Detected Hardware Unit Hang:
TDH <0>
TDT <1>
next_to_use <1>
next_to_clean <0>
buffer_info[next_to_clean]:
time_stamp <1025f6641>
next_to_watch <0>
jiffies <1025f6bb8>
next_to_watch.status <0>
MAC Status <40080083>
PHY Status <796d>
PHY 1000BASE-T Status <3c00>
PHY Extended Status <3000>
PCI Status <10>
Jun 30 23:47:33 chiren kernel: e1000e 0000:00:1f.6 eno1: Detected Hardware Unit Hang:
TDH <0>
TDT <1>
next_to_use <1>
next_to_clean <0>
buffer_info[next_to_clean]:
time_stamp <1025f6641>
next_to_watch <0>
jiffies <1025f6db0>
next_to_watch.status <0>
MAC Status <40080083>
PHY Status <796d>
PHY 1000BASE-T Status <3c00>
PHY Extended Status <3000>
PCI Status <10>
Jun 30 23:47:35 chiren kernel: e1000e 0000:00:1f.6 eno1: Detected Hardware Unit Hang:
TDH <0>
TDT <1>
next_to_use <1>
next_to_clean <0>
buffer_info[next_to_clean]:
time_stamp <1025f6641>
next_to_watch <0>
jiffies <1025f6fa0>
next_to_watch.status <0>
MAC Status <40080083>
PHY Status <796d>
PHY 1000BASE-T Status <3c00>
PHY Extended Status <3000>
PCI Status <10>
Jun 30 23:47:35 chiren kernel: e1000e 0000:00:1f.6 eno1: Reset adapter unexpectedly
Jun 30 23:47:35 chiren kernel: vmbr0: port 1(eno1) entered disabled state
Jun 30 23:47:38 chiren pvestatd[1414]: command '/sbin/vgscan --ignorelockingfailure --mknodes' failed: exit code 5
Jun 30 23:47:39 chiren kernel: e1000e 0000:00:1f.6 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
Jun 30 23:47:39 chiren kernel: vmbr0: port 1(eno1) entered blocking state
Jun 30 23:47:39 chiren kernel: vmbr0: port 1(eno1) entered forwarding state
Jun 30 23:47:41 chiren kernel: e1000e 0000:00:1f.6 eno1: Detected Hardware Unit Hang:
TDH <0>
TDT <1>
next_to_use <1>
next_to_clean <0>
buffer_info[next_to_clean]:
time_stamp <1025f7401>
next_to_watch <0>
jiffies <1025f7580>
next_to_watch.status <0>
MAC Status <40080083>
PHY Status <796d>
PHY 1000BASE-T Status <3c00>
PHY Extended Status <3000>
PCI Status <10>And it goes on and on until i go and restart the server manually from the power button.
System Info:
System: Kernel: 6.1.2-1-pve x86_64 bits: 64 compiler: gcc v: 10.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.2-1-pve root=/dev/mapper/pve-root ro quiet intel_iommu=on
iommu=pt pcie_acs_override=downstream,multifunction initcall_blacklist=sysfb_init video=simplefb
ffvideo=vesafb
ff video=efifbff video=vesaff disable_vga=1 vfio_iommu_type1.allow_unsafe_interrupts=1kvm.ignore_msrs=1
modprobe.blacklist=radeon,nouveau,nvidia,nvidiafb,nvidia-gpu,snd_hda_intel,snd_hda_codec_hdmi,i915
Console: tty 0 Distro: Debian GNU/Linux 11 (bullseye)
Machine: Type: Desktop System: ASUS product: N/A v: N/A serial: N/A
Mobo: ASUSTeK model: PRIME B560M-K v: Rev 1.xx serial: <filter> UEFI: American Megatrends v: 0820
date: 04/27/2021
CPU: Info: 6-Core model: 11th Gen Intel Core i5-11400 socket: LGA1200 bits: 64 type: MT MCP arch: N/A
family: 6 model-id: A7 (167) stepping: 1 microcode: 3C L1 cache: 480 KiB L2 cache: 12 MiB
L3 cache: 11.7 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 62208
Speed: 4281 MHz min/max: 800/4400 MHz base/boost: 2574/4400 volts: 0.8 V ext-clock: 100 MHz
Core speeds (MHz): 1: 4281 2: 4205 3: 4295 4: 4294 5: 4176 6: 4292 7: 4194 8: 4290 9: 2600 10: 2600
11: 4284 12: 4291
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT vulnerable
Type: retbleed mitigation: Enhanced IBRS
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB filling, PBRSB-eIBRS: SW sequence
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: NVIDIA GP106 [GeForce GTX 1060 6GB] driver: vfio-pci v: N/A alternate: nvidiafb,nouveau
bus ID: 01:00.0 chip ID: 10de:1c03 class ID: 0300
Display: server: No display server data found. Headless machine? tty: 120x30
Message: Advanced graphics data unavailable in console for root.
Audio: Device-1: Intel vendor: ASUSTeK driver: N/A alternate: snd_hda_intel, snd_sof_pci_intel_tgl
bus ID: 00:1f.3 chip ID: 8086:43c8 class ID: 0403
Device-2: NVIDIA GP106 High Definition Audio driver: vfio-pci alternate: snd_hda_intel bus ID: 01:00.1
chip ID: 10de:10f1 class ID: 0403
Sound Server: ALSA v: k6.1.2-1-pve
Network: Device-1: Intel Ethernet I219-V vendor: ASUSTeK driver: e1000e v: kernel port: efa0 bus ID: 00:1f.6
chip ID: 8086:15fa class ID: 0200
IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
IF-ID-1: bonding_masters state: N/A speed: N/A duplex: N/A mac: N/A
IF-ID-2: fwbr100i0 state: up speed: 10000 Mbps duplex: unknown mac: <filter>
IF-ID-3: fwbr101i0 state: up speed: 10000 Mbps duplex: unknown mac: <filter>
IF-ID-4: fwbr102i0 state: up speed: 10000 Mbps duplex: unknown mac: <filter>
IF-ID-5: fwln100i0 state: up speed: 10000 Mbps duplex: full mac: <filter>
IF-ID-6: fwln101i0 state: up speed: 10000 Mbps duplex: full mac: <filter>
IF-ID-7: fwln102i0 state: up speed: 10000 Mbps duplex: full mac: <filter>
IF-ID-8: fwpr100p0 state: up speed: 10000 Mbps duplex: full mac: <filter>
IF-ID-9: fwpr101p0 state: up speed: 10000 Mbps duplex: full mac: <filter>
IF-ID-10: fwpr102p0 state: up speed: 10000 Mbps duplex: full mac: <filter>
IF-ID-11: tap100i0 state: unknown speed: 10 Mbps duplex: full mac: <filter>
IF-ID-12: tap101i0 state: unknown speed: 10 Mbps duplex: full mac: <filter>
IF-ID-13: veth102i0 state: up speed: 10000 Mbps duplex: full mac: <filter>
IF-ID-14: vmbr0 state: up speed: 10000 Mbps duplex: unknown mac: <filter>
Drives: Local Storage: total: 9.1 TiB lvm-free: 42.02 GiB used: 20.99 GiB (0.2%)
ID-1: /dev/sda maj-min: 8:0 vendor: Crucial model: CT500MX500SSD1 family: Micron Client SSDs
size: 465.76 GiB block size: physical: 4096 B logical: 512 B sata: 3.3 speed: 6.0 Gb/s rotation: SSD
serial: <filter> rev: 023 temp: 45 C scheme: GPT
SMART: yes state: enabled health: PASSED on: 354d 2h cycles: 2649 written: 117.47 TiB Old-Age:
UDMA CRC errors: 19182 alert: Bad cable/connection?
ID-2: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST4000DM004-2CV104 family: BarraCuda 3.5
size: 3.64 TiB block size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rotation: 5425 rpm
serial: <filter> rev: 0001 temp: 41 C scheme: GPT
SMART: yes state: enabled health: PASSED on: 358d 0h cycles: 86 read: 41.06 TiB written: 11.08 TiB
Pre-Fail: attribute: Spin_Retry_Count value: 100 worst: 100 threshold: 97
ID-3: /dev/sdc maj-min: 8:32 vendor: Toshiba model: DT01ACA100 family: 3.5" DT01ACA... Desktop HDD
size: 931.51 GiB block size: physical: 4096 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rotation: 7200 rpm
serial: <filter> rev: A750 temp: 38 C scheme: GPT
SMART: yes state: enabled health: PASSED on: 3y 30d 16h cycles: 4369
ID-4: /dev/sdd maj-min: 8:48 vendor: Seagate model: ST500LM012 HN-M500MBB
family: Seagate SpinPoint M8 (AF) size: 465.76 GiB block size: physical: 4096 B logical: 512 B sata: 3.0
speed: 3.0 Gb/s rotation: 5400 rpm serial: <filter> rev: 0010 temp: 36 C scheme: GPT
SMART: yes state: enabled health: PASSED on: 2y 12d 16h cycles: 4134
ID-5: /dev/sde maj-min: 8:64 vendor: Toshiba model: HDWD240 size: 3.64 TiB block size: physical: 4096 B
logical: 512 B sata: 3.3 speed: 6.0 Gb/s rotation: 5400 rpm serial: <filter> rev: 0A temp: 35 C
scheme: GPT
SMART: yes state: enabled health: PASSED on: 1y 52d 19h cycles: 327
Partition: ID-1: / raw size: 96 GiB size: 93.93 GiB (97.85%) used: 19.15 GiB (20.4%) fs: ext4 block size: 4096 B
dev: /dev/dm-1 maj-min: 253:1 mapped: pve-root
ID-2: /boot/efi raw size: 512 MiB size: 511 MiB (99.80%) used: 328 KiB (0.1%) fs: vfat block size: 512 B
dev: /dev/sda2 maj-min: 8:2
Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default)
ID-1: swap-1 type: partition size: 8 GiB used: 1.84 GiB (22.9%) priority: -2 dev: /dev/dm-0
maj-min: 253:0 mapped: pve-swap
Sensors: System Temperatures: cpu: 27.8 C mobo: N/A
Fan Speeds (RPM): N/A
Info: Processes: 323 Uptime: 46m wakeups: 0 Memory: 15.47 GiB used: 15.29 GiB (98.9%) Init: systemd v: 247
runlevel: 5 Compilers: gcc: N/A Packages: apt: 886 lib: 498 Shell: Zsh v: 5.8 running in: tty 0 (SSH)
inxi: 3.3.01
Thanks in advance if anyone can help!
