In a (GNS3 based) test setup I'm currently trying to implement a BGP-EVPN setup.
As we are using Dell OS10 switches I built a setup based on the example from...
https://www.dell.com/support/manual...bf9452-d9a4-4822-a715-d63069e40b8b&lang=en-us
...without the overlay VRF- and layer3 routing part (means only BGP underlay routing and EVPN for distributing the VXLAN vtep ips).
I want now to integrate a PVE host as an equal single-host leaf into this setup and somehow can't get it to work. BGP underlay routing works but I can't get it to exchange the vtep ips; both sides (dell switch leafs and pve leaf) are ignoring each other.
Any advice is appreciated.
As we are using Dell OS10 switches I built a setup based on the example from...
https://www.dell.com/support/manual...bf9452-d9a4-4822-a715-d63069e40b8b&lang=en-us
...without the overlay VRF- and layer3 routing part (means only BGP underlay routing and EVPN for distributing the VXLAN vtep ips).
I want now to integrate a PVE host as an equal single-host leaf into this setup and somehow can't get it to work. BGP underlay routing works but I can't get it to exchange the vtep ips; both sides (dell switch leafs and pve leaf) are ignoring each other.
Any advice is appreciated.