PVE 2, bond & vlan & bridge - received packet with own address as source address

[nicolasdiogo]

Hello,

i came across a problem with bond & vlan setup on proxmox 2, details below:

# pveversion -v
pve-manager: 2.1-14 (pve-manager/2.1/f32f3f46)
running kernel: 2.6.32-14-pve
proxmox-ve-2.6.32: 2.1-74
pve-kernel-2.6.32-14-pve: 2.6.32-74
lvm2: 2.02.95-1pve2
clvm: 2.02.95-1pve2
corosync-pve: 1.4.3-1
openais-pve: 1.1.4-2
libqb: 0.10.1-2
redhat-cluster-pve: 3.1.92-3
resource-agents-pve: 3.9.2-3
fence-agents-pve: 3.1.8-1
pve-cluster: 1.0-27
qemu-server: 2.0-49
pve-firmware: 1.0-18
libpve-common-perl: 1.0-30
libpve-access-control: 1.0-24
libpve-storage-perl: 2.0-31
vncterm: 1.0-3
vzctl: 3.0.30-2pve5
vzprocps: 2.0.11-2
vzquota: 3.0.12-3
pve-qemu-kvm: 1.1-8
ksm-control-daemon: 1.1-1

i had /var/log/syslog filled with messages similar to these:

Nov 24 15:12:10 sun01 kernel: bond0: received packet with  own address as source address

as shown on this archived post for PVE 1
http://forum.proxmox.com/archive/index.php/t-2676.html

and adding the suggested options (below) to my bridges (vmbr0, vmbr1 ) solved this problem.

bridge_stp on
bridge_maxwait 0
bridge_maxage 0
bridge_fd 0
bridge_ageing 0

regards,

 

[spirit]

Hi, are you sure you don't have a loop in your bond ?

what's is the bonding type ? lacp ? active-backup?

 

[nicolasdiogo]

Hi, are you sure you don't have a loop in your bond ?

what's is the bonding type ? lacp ? active-backup?

I have the bond setup as
[h=4]balance-rr[/h]

 

[spirit]

do you use 1 switch, or 2 switchs ?

Do have trunked you ports on your switch(s) ?

 

[nicolasdiogo]

switch is trunked

there are two nodes in this proxmox installation.