Hi,
I'm having a real problem trying to get my container to be accessable from the outside, I've followed everything I can find on the internet, but normally I get stuck at a stage because of my lack of experiance with linux.
(please note these aren't my actual IP's)
The setup:
The Proxmox server is setup in the following way:
Public IP: 86.6.170.70 (open to the internet without firewall) - Static IP assigned by MAC.
Private IP: 192.168.0.250 (behide another public ip, going through dir-655 router)
Using the following config file in /etc/network/interfaces
I have created a container for Wifigator MX with the IP 192.168.0.249 - venet.
Currenlty I can access my proxmox base from the internal IP and public IP. The container I can access for the internal IP only.
I'm trying to setup it up the container so that it has access from the internet to its interface (webmin), but I've tried bridging the cards but failed (because I don't really know what I'm doing).
I'd be grateful if anyone could help.
I'm having a real problem trying to get my container to be accessable from the outside, I've followed everything I can find on the internet, but normally I get stuck at a stage because of my lack of experiance with linux.
(please note these aren't my actual IP's)
The setup:
The Proxmox server is setup in the following way:
Public IP: 86.6.170.70 (open to the internet without firewall) - Static IP assigned by MAC.
Private IP: 192.168.0.250 (behide another public ip, going through dir-655 router)
Using the following config file in /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto eth0
iface eth inet static
address 86.6.170.70
netmask 255.255.252.0
gateway 86.6.170.1
auto vmbr0
iface vmbr0 inet static
address 86.6.170.70
netmask 255.255.252.0
gateway 86.6.170.1
bridge_ports eth0
bridge_stp off
bridge_fd 0
up route add -host 192.168.0.249 dev vmbr0
auto vmbr1
iface vmbr1 inet static
address 192.168.0.250
netmask 255.255.255.0
gateway 192.168.0.1
bridge_ports eth1
bridge_stp off
bridge_fd 0
I have created a container for Wifigator MX with the IP 192.168.0.249 - venet.
Currenlty I can access my proxmox base from the internal IP and public IP. The container I can access for the internal IP only.
I'm trying to setup it up the container so that it has access from the internet to its interface (webmin), but I've tried bridging the cards but failed (because I don't really know what I'm doing).
I'd be grateful if anyone could help.