hello, sirs!
I've installed the nagios with nagvis plugin and from time to time it stops to respond, while i still can vzctl enter into this machine.
i receive this message in /var/log/messages
the /proc/bc/resources gives me failcnt errors on privvmpages all the time. i tried to give it more memory, but it asks for more all the time (maxheld is larger than barrier)
kernel:
Linux sisemon 2.6.18-2-pve #1 SMP Mon Feb 1 10:45:26 CET 2010 x86_64 GNU/Linux
pveversion:
proxmox-ve-2.6.18: 1.5-5
pve-kernel-2.6.24-11-pve: 2.6.24-23
pve-kernel-2.6.24-10-pve: 2.6.24-21
pve-kernel-2.6.18-2-pve: 2.6.18-5
qemu-server: 1.1-16
pve-firmware: 1.0-5
libpve-storage-perl: 1.0-13
vncterm: 0.9-2
vzctl: 3.0.23-1pve11
vzdump: 1.2-5
vzprocps: 2.0.11-1dso2
vzquota: 3.0.11-1
pve-qemu-kvm-2.6.18: 0.9.1-5
also used 2.6.24 kernel for a while - no changes.
I've installed the nagios with nagvis plugin and from time to time it stops to respond, while i still can vzctl enter into this machine.
i receive this message in /var/log/messages
the /proc/bc/resources gives me failcnt errors on privvmpages all the time. i tried to give it more memory, but it asks for more all the time (maxheld is larger than barrier)
kernel:
Linux sisemon 2.6.18-2-pve #1 SMP Mon Feb 1 10:45:26 CET 2010 x86_64 GNU/Linux
pveversion:
proxmox-ve-2.6.18: 1.5-5
pve-kernel-2.6.24-11-pve: 2.6.24-23
pve-kernel-2.6.24-10-pve: 2.6.24-21
pve-kernel-2.6.18-2-pve: 2.6.18-5
qemu-server: 1.1-16
pve-firmware: 1.0-5
libpve-storage-perl: 1.0-13
vncterm: 0.9-2
vzctl: 3.0.23-1pve11
vzdump: 1.2-5
vzprocps: 2.0.11-1dso2
vzquota: 3.0.11-1
pve-qemu-kvm-2.6.18: 0.9.1-5
also used 2.6.24 kernel for a while - no changes.