Missing disk images under local storage pool

[nixgeek]

Hi, I just upgraded to Proxmox VE 1.4

I am missing a few disk images for the default Local disk storage pool


ls -al /var/lib/vz/images/
total 24
drwxr-xr-x 6 root root 4096 2009-09-13 11:15 .
drwxr-xr-x 14 root root 4096 2009-09-03 21:47 ..
drwxr-xr-x 2 root root 4096 2009-09-17 13:09 103
drwxr-xr-x 2 root root 4096 2009-09-17 02:22 104
drwxr-xr-x 2 root root 4096 2009-09-01 01:11 106
drwxr-xr-x 2 root root 4096 2009-09-13 11:15 111

Only 111 shows up in the Storage webgui under Volume ID for Virtual Disks.
Storage 'local': Virtual Disks


Volume IDVMIDSize (GB)local:111/vm-111-disk.qcow211132.00

Here is list of Images

# ls -al /var/lib/vz/images/*
/var/lib/vz/images/103:
total 20500032
drwxr-xr-x 2 root root 4096 2009-09-17 13:09 .
drwxr-xr-x 6 root root 4096 2009-09-13 11:15 ..
-rw-r--r-- 1 root root 20971520000 2009-09-17 09:47 sunvm1.img

/var/lib/vz/images/104:
total 33587244
drwxr-xr-x 2 root root 4096 2009-09-17 02:22 .
drwxr-xr-x 6 root root 4096 2009-09-13 11:15 ..
-rw-r--r-- 1 root root 34359738368 2009-09-13 11:02 vm-104-disk.img

/var/lib/vz/images/106:
total 16400028
drwxr-xr-x 2 root root 4096 2009-09-01 01:11 .
drwxr-xr-x 6 root root 4096 2009-09-13 11:15 ..
-rw-r--r-- 1 root root 16777216000 2009-09-17 09:45 ldap01.img

/var/lib/vz/images/111:
total 6028308
drwxr-xr-x 2 root root 4096 2009-09-13 11:15 .
drwxr-xr-x 6 root root 4096 2009-09-13 11:15 ..
-rw-r--r-- 1 root root 6166941696 2009-09-17 09:47 vm-111-disk.qcow2


When I try to start the other VM's it fails.

/usr/sbin/qm start 103
unable to parse volume ID '/dev/sde'
unable to parse volume filename 'sunvm1.img'
VM 103 start failed -


How can I add the other 3 Virtual Disks to Local Storage pool?

Also, i was already using iSCSI LUNS - So my Proxmox VE servers were the
initiators from my Local SAN iSCSI Target. How do I add the /dev/sd? to the
Local storage pool?

 

[nixgeek]

ok.. It looks like because of my non standard naming of the disk files is causing them
to not show up in the Storage tab of the Web Gui. Also I was using RAW disks and
not qcow2. Ok so its the .img extension that is causing the issue. For raw disks
I changed it from .img to .raw and they now show up. So disk images with .img
extension will not show up.

I still need to know how to get my iSCSI LUNS to show up or do I? I am using these as
additional disks in two of my KVM VM's... These are shared between my two node
cluster. So i can migrate them between the two nodes and the 2nd disks {iscsi} are
available to each VM on either node.

Please advise...

 

[nixgeek]

Ok so I am a hacker!

I just added the iSCSI luns to a new group with using LUNs directly enabled.
And after fixing the name of the disk file I was able to boot my KVM VM just fine
now.

 

[nixgeek]

Re: Missing disk images under local storage pool {RESOLVED}

Ok so I am a hacker!

I just added the iSCSI luns to a new group with using LUNs directly enabled.
And after fixing the name of the disk file I was able to boot my KVM VM just fine
now.