Hello,
I have a little problem to acces the hardware tab when my ISCSI SAN is overloaded :
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, root and inform them of the time the error occurred, and anything you might have done that may have caused the error.
[6044]ERR: 24: Error in Perl code: 500 read timeout
This "Bug" doesn't appears when my iSCSI SAN is free (but the tab time load is long - 5/6 sec).
I have "normals" errors (md-multipath doesn't works perfectly with my SAN model) :
sci-virt1:~# pvesm list
/dev/sdc: read failed after 0 of 4096 at 0: Input/output error
/dev/sdf: read failed after 0 of 4096 at 0: Input/output error
/dev/sdc: read failed after 0 of 4096 at 0: Input/output error
/dev/sdf: read failed after 0 of 4096 at 0: Input/output error
/dev/sdc: read failed after 0 of 4096 at 0: Input/output error
/dev/sdf: read failed after 0 of 4096 at 0: Input/output error
Backup nfs 0 1 8052162560 2586277888 32%
ISO nfs 0 1 8052162560 2586277888 32%
VMSTORE lvm 0 1 1317068800 293134336 22%
local dir 0 1 601340840 12497672 2%
san1 iscsi 0 1 0 0 100%
(this command takes 5 seconds to print the results)
Is there a solution or a timeout variable I can enlarge?
Thanks in advance.
Clément.
I have a little problem to acces the hardware tab when my ISCSI SAN is overloaded :
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, root and inform them of the time the error occurred, and anything you might have done that may have caused the error.
[6044]ERR: 24: Error in Perl code: 500 read timeout
This "Bug" doesn't appears when my iSCSI SAN is free (but the tab time load is long - 5/6 sec).
I have "normals" errors (md-multipath doesn't works perfectly with my SAN model) :
sci-virt1:~# pvesm list
/dev/sdc: read failed after 0 of 4096 at 0: Input/output error
/dev/sdf: read failed after 0 of 4096 at 0: Input/output error
/dev/sdc: read failed after 0 of 4096 at 0: Input/output error
/dev/sdf: read failed after 0 of 4096 at 0: Input/output error
/dev/sdc: read failed after 0 of 4096 at 0: Input/output error
/dev/sdf: read failed after 0 of 4096 at 0: Input/output error
Backup nfs 0 1 8052162560 2586277888 32%
ISO nfs 0 1 8052162560 2586277888 32%
VMSTORE lvm 0 1 1317068800 293134336 22%
local dir 0 1 601340840 12497672 2%
san1 iscsi 0 1 0 0 100%
(this command takes 5 seconds to print the results)
Is there a solution or a timeout variable I can enlarge?
Thanks in advance.
Clément.