Installed on an old Acer AM1100-B1300A (4gb pc2-5300, 250gb & 150gb HDD, AMD athlon 64 x2 processor) using onboard NIC and PCI NIC, during installation it gives 192.168.100.2, 255.255.255.0, 192.168.100.1 for the NIC settings, but my network is using 192.168.1.2-256,255.255.255,192.168.1.1. from my readings shouldnt the installation procedure use dhcp to pull your networks settings? I have tried setting the NIC to the correct settings for my network but after booting it says SKY2 ETH0: TX Timeout and i cannot access web interface from the ip. anyone have any clues? I am fairly new to using linux/debian OS's. Thanks