Hi,
I'm currently building a dual cluster with drbd and lvm.
Following the HOWTO available on the web site, I successfully built the cluster. Next I followed the DRBD HOWTO and successfully build the primary/primary DRBD mirror and applied the LVM configuration.
A "pvscan" give me the following output:
PV /dev/dm-4 VG drbdvg lvm2 [455.91 GB / 455.91 GB free]
PV /dev/sda2 VG pve lvm2 [19.49 GB / 2.49 GB free]
Then I should go to the web interface and try to add the LVM group to the Proxmox VE storage but I can't see any volume group named "drbdvg" in the "Volume Group Name" list. The only one listed is "pve"
Could you help me to resolve this issue ?
Config :
- Intel I7
- LSI MegaRaid 9260-4 controller, 2x SSD Crucial C300 256GB in RAID0 divided in 2 partitions
(1st partition (~20GB) for Proxmox installation and 2nd partition (~490GB) for DRBD
- Proxmox VE 1.7 (kernel 2.6.32-4-pve)
Initially, I upgraded to the kernel 2.6.35 (always following the HOWTO) but due to the DRBD version difference, I boot on the kernel 2.6.32-4-pve for safety.
Thanks for your help
oban
I'm currently building a dual cluster with drbd and lvm.
Following the HOWTO available on the web site, I successfully built the cluster. Next I followed the DRBD HOWTO and successfully build the primary/primary DRBD mirror and applied the LVM configuration.
A "pvscan" give me the following output:
PV /dev/dm-4 VG drbdvg lvm2 [455.91 GB / 455.91 GB free]
PV /dev/sda2 VG pve lvm2 [19.49 GB / 2.49 GB free]
Then I should go to the web interface and try to add the LVM group to the Proxmox VE storage but I can't see any volume group named "drbdvg" in the "Volume Group Name" list. The only one listed is "pve"
Could you help me to resolve this issue ?
Config :
- Intel I7
- LSI MegaRaid 9260-4 controller, 2x SSD Crucial C300 256GB in RAID0 divided in 2 partitions
(1st partition (~20GB) for Proxmox installation and 2nd partition (~490GB) for DRBD
- Proxmox VE 1.7 (kernel 2.6.32-4-pve)
Initially, I upgraded to the kernel 2.6.35 (always following the HOWTO) but due to the DRBD version difference, I boot on the kernel 2.6.32-4-pve for safety.
Thanks for your help
oban